Introduction
Production Information of Branson, 4225CH
The production information of the tractor (4225CH) includes details about its manufacturing.
| Compact Utility tractor |
| Manufacturer | Branson (a part of Kukje) |
|---|
Dimension and Tires Information of Branson, 4225CH
This section sums up the dimension and tires information of the tractor.
| Wheelbase | 71.1 inches [180 cm] |
|---|---|
| Shipping weight | 4195 lbs [1902 kg] |
| Height (cab) | 96.8 inches [245 cm] |
| Length | 129 inches [327 cm] |
| Ground clearance | 13.1 inches [33 cm] |
| Width | 60.2 inches [152 cm] |
| Standard tires (ag) | Front: 9.5x16. Rear: 12.4x28 |
|---|---|
| Industrial front | 10x16.5-6 |
| Industrial rear | 420/70x24-6 |
Engine Specifications of Branson, 4225CH
Get the specifications for the engine and if different options are available.
| Kukje A2000N2-UTR4 |
| Liquid-cooled |
| Diesel |
| 4-cylinder |
| Coolant capacity | 6.4 qts [6.1 L] |
|---|---|
| Power (net) | 42 hp [31.3 kW] |
| Air cleaner | Dual dry element |
| Rated RPM | 2600 |
| Compression | 21:1 |
| Displacement | 127.2 ci [2.1 L] |
| Emissions | Tier IV |
| Bore/Stroke | 3.31x3.70 inches [84 x 94 mm] |
| Oil capacity | 7 qts [6.6 L] |
| Starter volts | 12 |
| Starter | Electric |
Transmission Information of Branson, 4225CHY
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Type | Hydrostatic |
|---|---|
| Gears | Infinite forward and reverse (3-range) |
| Oil capacity | 40 qts [37.9 L] |
Mechanical Specs of Branson, 4225CHY
This section summarizes all mechanical information such as the brake system and other specifications.
| Four-wheel drive |
| Cab with air-conditioning. |
| Wet disc brakes |
| Power steering |
| Differential lock | Mechanical rear |
|---|
Power Information of Branson, 4225CHY
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Independent |
|---|---|
| 540E@2000 | |
| Engine RPM | 540@2500 |
| Clutch | Electro-hydraulic wet disc |
| Rear PTO Type | 540/540E (1.375) |
Hydraulics Specifications of Branson, 4225CH
Hydraulic system type, pressure, pump flow and valves.
| Type | Open center |
|---|---|
| Total flow | 15.4 gpm [58.3 lpm] |
| Pump flow | 10.4 gpm [39.4 lpm] |
| Capacity | 10 gal [37.9 L] |
| Steering flow | 5 gpm [18.9 lpm] |
| Pressure | 2100 psi [144.8 bar] |
Three-Point Hitch of Branson, 4225CH
Hitch category and rear/front lift capacity.
| Rear Type | I |
|---|---|
| Rear lift (at 24"/610mm) | 2420 lbs [1097 kg] |
| Control | Position control |
| Rear lift (at ends) | 3306 lbs [1499 kg] |
Electrical System of Branson, 4225CH
Battery voltage, charging system and ground.
| Ground | Negative |
|---|---|
| Battery volts | 12 |
| Charging system | Alternator |
| Charging amps | 70 |
Frequently asked questions
How much horsepower does the Branson 4225CH have?
The Branson 4225CH delivers 42 HP.
What years was the Branson 4225CH produced?
The Branson 4225CH was produced in 2017+.
What engine does the Branson 4225CH have?
The Branson 4225CH is powered by a Diesel, 4-cylinder engine.
What transmission does the Branson 4225CH use?
The Branson 4225CH uses a Hydrostatic transmission.
How much does the Branson 4225CH weigh?
The Branson 4225CH weighs 4195 lbs [1902 kg].
Is the Branson 4225CH 4WD?
The Branson 4225CH is available in 4WD.