Introduction
Production Information of Branson, 4225H
The production information of the tractor (4225H) includes details about its manufacturing.
| Compact Utility tractor |
| Manufacturer | Branson (a part of Kukje) |
|---|
Dimension and Tires Information of Branson, 4225H
This section sums up the dimension and tires information of the tractor.
| Wheelbase | 71.1 inches [180 cm] |
|---|---|
| Shipping weight | 4153 lbs [1883 kg] |
| Height (ROPS) | 96 inches [243 cm] |
| Length | 129 inches [327 cm] |
| Ground clearance | 13.1 inches [33 cm] |
| Width | 60.2 inches [152 cm] |
| Standard tires (ag) | Front: 9.5x16. Rear: 12.4x28 |
|---|---|
| Industrial front | 10x16.5-6 |
| Industrial rear | 420/70x24-6 |
Engine Specifications of Branson, 4225H
Get the specifications for the engine and if different options are available.
| Kukje A2000N2-UTR4 |
| Liquid-cooled |
| Diesel |
| 4-cylinder |
| Coolant capacity | 6.4 qts [6.1 L] |
|---|---|
| Power (net) | 42 hp [31.3 kW] |
| Air cleaner | Dual dry element |
| Rated RPM | 2600 |
| Compression | 21:1 |
| Displacement | 127.2 ci [2.1 L] |
| Emissions | Tier IV |
| Bore/Stroke | 3.31x3.70 inches [84 x 94 mm] |
| Oil capacity | 7 qts [6.6 L] |
| Starter volts | 12 |
| Starter | Electric |
Transmission Information of Branson, 4225HY
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Type | Hydrostatic |
|---|---|
| Gears | Infinite forward and reverse (3-range) |
| Oil capacity | 40 qts [37.9 L] |
Mechanical Specs of Branson, 4225HY
This section summarizes all mechanical information such as the brake system and other specifications.
| Four-wheel drive |
| Two-post folding ROPS. |
| Wet disc brakes |
| Power steering |
| Differential lock | Mechanical rear |
|---|
Power Information of Branson, 4225HY
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Independent |
|---|---|
| 540E@2000 | |
| Engine RPM | 540@2500 |
| Clutch | Electro-hydraulic wet disc |
| Rear PTO Type | 540/540E (1.375) |
Hydraulics Specifications of Branson, 4225H
Hydraulic system type, pressure, pump flow and valves.
| Type | Open center |
|---|---|
| Total flow | 15.4 gpm [58.3 lpm] |
| Pump flow | 10.4 gpm [39.4 lpm] |
| Capacity | 10 gal [37.9 L] |
| Steering flow | 5 gpm [18.9 lpm] |
| Pressure | 2100 psi [144.8 bar] |
Three-Point Hitch of Branson, 4225H
Hitch category and rear/front lift capacity.
| Rear Type | I |
|---|---|
| Rear lift (at 24"/610mm) | 2420 lbs [1097 kg] |
| Control | Position control |
| Rear lift (at ends) | 3306 lbs [1499 kg] |
Electrical System of Branson, 4225H
Battery voltage, charging system and ground.
| Ground | Negative |
|---|---|
| Battery volts | 12 |
| Charging system | Alternator |
| Charging amps | 70 |
Frequently asked questions
How much horsepower does the Branson 4225H have?
The Branson 4225H delivers 42 HP.
What years was the Branson 4225H produced?
The Branson 4225H was produced in 2017+.
What engine does the Branson 4225H have?
The Branson 4225H is powered by a Diesel, 4-cylinder engine.
What transmission does the Branson 4225H use?
The Branson 4225H uses a Hydrostatic transmission.
How much does the Branson 4225H weigh?
The Branson 4225H weighs 4153 lbs [1883 kg].
Is the Branson 4225H 4WD?
The Branson 4225H is available in 4WD.