
CaseIH Puma 130
Power
131 hp
Production
2011-2013
Engine
Turbocharged diesel, 6-cylinder
Transmission
Full power shift
Weight
13600 lbs [6168 kg]
Drive
4WD
From the same series:
Introduction
Production Information of CaseIH, Puma 130
The production information of the tractor (Puma 130) includes details about its manufacturing.
| Row-Crop tractor |
| Manufacturer | CaseIH |
|---|
Dimension and Tires Information of CaseIH, Puma 130
This section sums up the dimension and tires information of the tractor.
| Flange rear axle |
| Front tread | 61.4 to 88.8 inches [155 to 225 cm] |
|---|---|
| Wheelbase | 107.6 inches [273 cm] |
| Bar rear axle | 3.625 by 98 inches [92 by 2489 mm] |
| 109.8 inches (suspended front axle) [278 cm] | |
| Bar rear axle | 3.625 by 112 inches [92 by 2844 mm] |
| Operating weight | 13600 lbs [6168 kg] |
No data available
Engine Specifications of CaseIH, Puma 130
Get the specifications for the engine and if different options are available.
| FPT |
| Liquid-cooled |
| 6-cylinder |
| Turbocharged diesel |
| Emission control | Selective catalytic reduction (SCR) |
|---|---|
| Rated RPM | 2200 |
| Displacement | 410.6 ci [6.7 L] |
| Bore/Stroke | 4.094x5.197 inches [104 x 132 mm] |
| Emissions | Interim Tier 4 |
| Maximum Power (gross) | 171 hp [127.5 kW] |
| Rated Power (gross) | 131 hp [97.7 kW] |
| Oil capacity | 16 qts [15.1 L] |
| Starter volts | 12 |
| Starter | Electric |
Transmission Information of CaseIH, Puma 130Y
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Type | Full power shift |
|---|---|
| Gears | 18 forward and 6 reverse |
| Clutch | Electro-hydraulic wet disc |
Transmission variants 2
| Adds transport gear to the power shift, providing road speed at reduced engine RPMs. |
| Transmission | EconoGear |
|---|---|
| Clutch | Electro-hydraulic wet disc |
| Type | Full power shift |
| Gears | 19 forward and 6 reverse |
Transmission variants 3
| Type | Continuously variable transmission (CVT) |
|---|---|
| Gears | Infinite forward and reverse |
| 18-speed full power shift |
| 19-speed full power shift |
| Continuously variable transmission (CVT) |
Mechanical Specs of CaseIH, Puma 130Y
This section summarizes all mechanical information such as the brake system and other specifications.
| Four-wheel drive |
| Cab standard. Optional cab suspension. |
Power Information of CaseIH, Puma 130Y
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Independent |
|---|---|
| Rear PTO Type | 540/1000 (1.375) |
Hydraulics Specifications of CaseIH, Puma 130
Hydraulic system type, pressure, pump flow and valves.
| Type | Closed center pressure flow compensating (PFC) |
|---|---|
| Pump flow | 29 gpm [109.8 lpm] |
| 3 to 5 (electronic) | |
| Capacity | 19.5 gal [73.8 L] |
| 32 gpm (optional) [121.1 lpm] | |
| Rear valves | 3 to 4 (mechanical) |
Three-Point Hitch of CaseIH, Puma 130
Hitch category and rear/front lift capacity.
| Rear Type | 2/3N |
|---|---|
| Rear lift | 7,900 lbs [3583 kg] |
| 9,200 lbs (optional) [4173 kg] |
Electrical System of CaseIH, Puma 130
Battery voltage, charging system and ground.
| Battery volts | 12 |
|---|---|
| Ground | Negative |
| Batteries | 2 |
| 200 OptOptional | |
| Charging system | Alternator |
| Battery CCA | 650 |
| Charging amps | 150 |
Frequently asked questions
How much horsepower does the CaseIH Puma 130 have?
The CaseIH Puma 130 delivers 131 HP.
What years was the CaseIH Puma 130 produced?
The CaseIH Puma 130 was produced in 2011-2013.
What engine does the CaseIH Puma 130 have?
The CaseIH Puma 130 is powered by a Turbocharged diesel, 6-cylinder engine.
What transmission does the CaseIH Puma 130 use?
The CaseIH Puma 130 uses a Full power shift transmission.
How much does the CaseIH Puma 130 weigh?
The CaseIH Puma 130 weighs 13600 lbs [6168 kg].
Is the CaseIH Puma 130 4WD?
The CaseIH Puma 130 is available in 4WD.