Introduction
Production Information of Challenger, MT345B
The production information of the tractor (MT345B) includes details about its manufacturing.
| Utility tractor |
| Manufacturer | Challenger (a part of AGCO) |
|---|
Dimension and Tires Information of Challenger, MT345B
This section sums up the dimension and tires information of the tractor.
| Wheelbase | 82.7 inches [210 cm] |
|---|---|
| Height (cab) | 102.5 inches [260 cm] |
| Height (ROPS) | 105 inches [266 cm] |
| Length | 148 inches [375 cm] |
| Width | 76 inches [193 cm] |
No data available
Engine Specifications of Challenger, MT345B
Get the specifications for the engine and if different options are available.
| Challenger |
| Liquid-cooled |
| Turbocharged aftercooled diesel |
| 3-cylinder |
| Power (gross) | 91 hp [67.9 kW] |
|---|---|
| Displacement | 201.4 ci [3.3 L] |
| Rated RPM | 2150 |
| Bore/Stroke | 4.13x5.00 inches [105 x 127 mm] |
| Starter volts | 12 |
Transmission Information of Challenger, MT345BY
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Four gears in three ranges with mechanical shuttle. |
| Type | Synchronized shuttle |
|---|---|
| Gears | 12 forward and reverse |
Transmission variants 2
| Four gears in three ranges with power shuttle. Push-button clutch allows gear shifting without the use of the foot clutch. |
| Type | Power shuttle |
|---|---|
| Gears | 12 forward and reverse |
| 12-speed synchronized shuttle |
| 12-speed power shuttle |
Mechanical Specs of Challenger, MT345BY
This section summarizes all mechanical information such as the brake system and other specifications.
| Two- or four-wheel drive |
| Two-post folding ROPS. Cab with air-conditioning optional. |
| Hydraulic wet disc brakes |
| Differential lock | Electro-hydraulic |
|---|---|
| Steering | Hydrostatic power |
Power Information of Challenger, MT345BY
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Independent |
|---|---|
| 540/540E *Optional. | |
| Clutch | Electro-hydraulic |
| Rear PTO Type | 540 |
Hydraulics Specifications of Challenger, MT345B
Hydraulic system type, pressure, pump flow and valves.
| Type | Open center |
|---|---|
| SCV flow | 15.8 gpm [59.8 lpm] |
| Mid valves | 0 or 2 |
| Pressure | 2755 psi [190.0 bar] |
| Total flow | 22.4 gpm [84.8 lpm] |
| Rear valves | 2 or 3 |
Three-Point Hitch of Challenger, MT345B
Hitch category and rear/front lift capacity.
| Rear Type | I/II |
|---|---|
| Control | Position and draft control |
| Rear lift (at ends) | 5500 lbs [2494 kg] |
Electrical System of Challenger, MT345B
Battery voltage, charging system and ground.
| Ground | Negative |
|---|---|
| Battery volts | 12 |
| Battery CCA | 675 |
| Charging system | Alternator |
| Charging amps | 80 |
Frequently asked questions
How much horsepower does the Challenger MT345B have?
The Challenger MT345B delivers 91 HP.
What years was the Challenger MT345B produced?
The Challenger MT345B was produced in 2006-2009.
What engine does the Challenger MT345B have?
The Challenger MT345B is powered by a Turbocharged aftercooled diesel, 3-cylinder engine.
What transmission does the Challenger MT345B use?
The Challenger MT345B uses a Synchronized shuttle transmission.
Is the Challenger MT345B 4WD?
The Challenger MT345B is available in 2WD/4WD.