Challenger MT645D tractor

Challenger MT645D

Power

240 hp

Production

2011-2013

Engine

Turbocharged air-to-air intercooled diesel, 6-cylinder

Transmission

Techstar CVT

Weight

33070 lbs [15000 kg]

Drive

4WD

From the same series:

MT655D

Introduction

Production Information of Challenger, MT645D

The production information of the tractor (MT645D) includes details about its manufacturing.

Original price was $263,455 in 2013
Row-Crop tractor
Built in Jackson, Minnesota, USA
ManufacturerChallenger (a part of AGCO)

Dimension and Tires Information of Challenger, MT645D

This section sums up the dimension and tires information of the tractor.

Front axle4WD Quadlink Suspension
Wheelbase122 inches [309 cm]
Max weight33070 lbs [15000 kg]
Shipping weight24250 lbs [10999 kg]
Length215.7 inches [547 cm]
Rear axle4.33 by 105 inches [109 by 2667 mm]
Front axle4WD
Height (cab)141 inches [358 cm]
Rear axle4.33 by 118 inches [109 by 2997 mm]
Standard tires (ag)Front: 480/70R34. Rear: 520/85R46

Engine Specifications of Challenger, MT645D

Get the specifications for the engine and if different options are available.

Liquid-cooled
6-cylinder
Turbocharged air-to-air intercooled diesel
Starter volts12
StarterElectric
Emission controlSelective catalytic reduction (SCR)
Fuel systemElectronic high-pressure common rail
Maximum Power270 hp [201.3 kW]
Displacement513.8 ci [8.4 L]
EmissionsInterim Tier IV
Power (gross)240 hp [179.0 kW]
Bore/Stroke4.370x5.709 inches [111 x 145 mm]
Rated RPM2100
Compression16.7:1
Pre-heatingThermostart

Transmission Information of Challenger, MT645DY

Discover all variants of transmission available for this tractor model.

Transmission variants 1

TransmissionTechstar CVT
TypeContinuously variable transmission
GearsInfinite forward and reverse

Mechanical Specs of Challenger, MT645DY

This section summarizes all mechanical information such as the brake system and other specifications.

Four-wheel drive
Hydraulic wet disc brakes
Cab standard with air-conditioning and OptiRide Plus hydraulic suspension AGCO System 150 (optional); AGCOMMAND (optional)
Hydraulic (optional)
SteeringHydrostatic power
Final drivesInboard planetary
Trailer brakesPneumatic (optional)
Differential lockElectro-hydraulic

Power Information of Challenger, MT645DY

Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.

1000@1970
Rear PTOIndependent
Engine RPM540E@1577
540E/1000/1000E (optional)
ClutchElectro-hydraulic
1000E@1605
Rear PTO Type1000/1000E (1.75)

Hydraulics Specifications of Challenger, MT645D

Hydraulic system type, pressure, pump flow and valves.

TypeClosed center load sensing (CCLS)
SCV flow26.4 gpm [99.9 lpm]
Valves4 to 6
Capacity29.1 gal [110.1 L]
Total flow46 gpm [174.1 lpm]
Pressure2900 psi [200.0 bar]

Three-Point Hitch of Challenger, MT645D

Hitch category and rear/front lift capacity.

Cat. 4 (optional)
Rear TypeIII
DrawbarCat. 3
Front lift (at ends)11000 lbs [4989 kg]
Rear lift22760 lbs [10323 kg]
Cat. 3 Heavy-Duty (optional)
Front HitchIII (optional)

Electrical System of Challenger, MT645D

Battery voltage, charging system and ground.

GroundNegative
Battery volts12
Batteries2
Charging systemAlternator
Charging amps240

Frequently asked questions

How much horsepower does the Challenger MT645D have?

The Challenger MT645D delivers 240 HP.

What years was the Challenger MT645D produced?

The Challenger MT645D was produced in 2011-2013.

What engine does the Challenger MT645D have?

The Challenger MT645D is powered by a Turbocharged air-to-air intercooled diesel, 6-cylinder engine.

What transmission does the Challenger MT645D use?

The Challenger MT645D uses a Techstar CVT transmission.

How much does the Challenger MT645D weigh?

The Challenger MT645D weighs 33070 lbs [15000 kg].

Is the Challenger MT645D 4WD?

The Challenger MT645D is available in 4WD.

Compare the Challenger MT645D with another model