Challenger MT595D
Power
240 hp
Production
2012-2014
Engine
Turbocharged intercooled diesel, 6-cylinder
Transmission
AutoPower VI
Drive
4WD
From the same series:
Introduction
Production Information of Challenger, MT595D
The production information of the tractor (MT595D) includes details about its manufacturing.
| Row-Crop tractor |
| $214,177 (2013 deluxe ) | |
| Manufacturer | Challenger (a part of AGCO) |
| Original price | $179,147 (2013 classic ) |
| Jackson, Minnesota, USA | |
| $203,867 (2013 deluxe ) | |
| Factories | Beauvais, France |
Dimension and Tires Information of Challenger, MT595D
This section sums up the dimension and tires information of the tractor.
| Bar rear axle | 4.33 by 86.7 inches [109 by 2202 mm] |
|---|---|
| Rear axle | 4.33 by 118.2 inches [109 by 3002 mm] |
| Standard tires (ag) | Front: 420/90R30. Rear: 480/80R46 |
|---|
Engine Specifications of Challenger, MT595D
Get the specifications for the engine and if different options are available.
| AGCO Power |
| Liquid-cooled |
| Turbocharged intercooled diesel |
| 6-cylinder |
| Air cleaner | Dual stage dry |
|---|---|
| Displacement | 449.4 ci [7.4 L] |
| Emission control | Selective catalyitic reduction (SCR) |
| Bore/Stroke | 4.252x5.276 inches [108 x 134 mm] |
| Starter volts | 12 |
| Starter | Electric |
| Fuel system | Electronic high pressure common rail |
| Power | 240 hp [179.0 kW] |
| Emissions | Interim Tier IV |
Transmission Information of Challenger, MT595DY
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Transmission | AutoPower VI |
|---|---|
| Type | Six-speed power shift |
| Gears | 24 forward and reverse |
Mechanical Specs of Challenger, MT595DY
This section summarizes all mechanical information such as the brake system and other specifications.
| Four-wheel drive |
| Cab standard with air-conditioning. AGCO System 150 (optional); AGCOMMAND (optional) |
| Hydraulic wet disc brakes |
| Final drives | Inboard planetary |
|---|---|
| Steering | Hydrostatic power |
Power Information of Challenger, MT595DY
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Independent |
|---|---|
| Clutch | Electro-hydraulic |
Hydraulics Specifications of Challenger, MT595D
Hydraulic system type, pressure, pump flow and valves.
| Type | Closed center load sensing (CCLS) |
|---|---|
| Total flow | 29 gpm [109.8 lpm] |
| SCV flow | 24.3 gpm [92.0 lpm] |
| Pressure | 2900 psi [200.0 bar] |
| 39 gpm (optional) [147.6 lpm] | |
| Valves | 2 to 4 |
Three-Point Hitch of Challenger, MT595D
Hitch category and rear/front lift capacity.
| Rear Type | III |
|---|---|
| Control | Electronic lower link draft control |
| Drawbar | Cat. 2 |
Electrical System of Challenger, MT595D
Battery voltage, charging system and ground.
| Battery volts | 12 |
|---|---|
| Ground | Negative |
| Batteries | 2 |
| 240 *Total capacity with dual 120A alternator option. | |
| Charging system | Alternator |
| Battery CCA | 600 |
| Charging amps | 175 |
Frequently asked questions
How much horsepower does the Challenger MT595D have?
The Challenger MT595D delivers 240 HP.
What years was the Challenger MT595D produced?
The Challenger MT595D was produced in 2012-2014.
What engine does the Challenger MT595D have?
The Challenger MT595D is powered by a Turbocharged intercooled diesel, 6-cylinder engine.
What transmission does the Challenger MT595D use?
The Challenger MT595D uses a AutoPower VI transmission.
Is the Challenger MT595D 4WD?
The Challenger MT595D is available in 4WD.