Challenger MT765D
Power
350 hp
Production
2012-2013
Engine
Turbocharged air-to-air intercooled diesel, 6-cylinder 24-valve
Transmission
Caterpillar
From the same series:
Introduction
Production Information of Challenger, MT765D
The production information of the tractor (MT765D) includes details about its manufacturing.
| Agricultural Crawler tractor |
| Built in Jackson, Minnesota, USA |
| Manufacturer | Challenger (a part of AGCO) |
|---|
Dimension and Tires Information of Challenger, MT765D
This section sums up the dimension and tires information of the tractor.
No data available
No data available
Engine Specifications of Challenger, MT765D
Get the specifications for the engine and if different options are available.
| AGCO POWER |
| Liquid-cooled |
| Turbocharged air-to-air intercooled diesel |
| 6-cylinder 24-valve |
| Starter volts | 12 |
|---|---|
| Displacement | 513.8 ci [8.4 L] |
| Emission control | Selective catalytic reduction (SCR) |
| Bore/Stroke | 4.370x5.709 inches [111 x 145 mm] |
| Maximum Power | 386 hp [287.8 kW] |
| Power (gross) | 350 hp [261.0 kW] |
| Emissions | Interim Tier IV |
Transmission Information of Challenger, MT765DY
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Transmission | Caterpillar |
|---|---|
| Clutch | Hydraulic wet disc |
| Type | Full power shift |
| Gears | 16 forward and 4 reverse |
Mechanical Specs of Challenger, MT765DY
This section summarizes all mechanical information such as the brake system and other specifications.
| Cab standard. |
| Hydraulic wet disc brakes |
| Drive | Crawler |
|---|---|
| Steering | Electro-hydraulic differential |
Power Information of Challenger, MT765DY
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Independent |
|---|---|
| Rear PTO Type | 1000 (1.75) |
Hydraulics Specifications of Challenger, MT765D
Hydraulic system type, pressure, pump flow and valves.
| Type | Closed-center pressure-flow compensated (PFC) |
|---|---|
| 59 gpm (optional) [223.3 lpm] | |
| Pump flow | 43.5 gpm [164.6 lpm] |
| Pressure | 2900 psi [200.0 bar] |
| SCV flow | 36 gpm [136.3 lpm] |
| Valves | 4 to 6 |
Three-Point Hitch of Challenger, MT765D
Hitch category and rear/front lift capacity.
| Rear Type | III/IIIN |
|---|---|
| Rear lift | 16000 lbs [7257 kg] |
Electrical System of Challenger, MT765D
Battery voltage, charging system and ground.
| Ground | Negative |
|---|---|
| Battery volts | 12 |
| Batteries | 2 |
| Charging system | Alternator |
| Charging amps | 300 (2x 150amp) |
Frequently asked questions
How much horsepower does the Challenger MT765D have?
The Challenger MT765D delivers 350 HP.
What years was the Challenger MT765D produced?
The Challenger MT765D was produced in 2012-2013.
What engine does the Challenger MT765D have?
The Challenger MT765D is powered by a Turbocharged air-to-air intercooled diesel, 6-cylinder 24-valve engine.
What transmission does the Challenger MT765D use?
The Challenger MT765D uses a Caterpillar transmission.