Challenger MT685C
Power
340 hp
Production
2009-2010
Engine
The engine uses AGCO's e3 selective catalytic reduction (SCR) system to reduce nitrogen oxides (NOx). The system uses a diesel exhaust fluid that is injected into the exhaust gas., 6-cylinder
Transmission
Dyna-VT
Weight
38,890 lbs [17640 kg]
Drive
4WD
From the same series:
Introduction
Production Information of Challenger, MT685C
The production information of the tractor (MT685C) includes details about its manufacturing.
| Row-Crop tractor |
| Built in Beauvais, France |
| Manufacturer | Challenger (a part of AGCO) |
|---|
Dimension and Tires Information of Challenger, MT685C
This section sums up the dimension and tires information of the tractor.
| Wheelbase | 122.2 inches [310 cm] |
|---|---|
| Max weight | 38,890 lbs [17640 kg] |
| Shipping weight | 24,250 lbs [10999 kg] |
| Length | 223.2 inches [566 cm] |
| Height (cab) | 133.1 inches [338 cm] |
| Ag front | 480/70R34 |
|---|---|
| Ag rear | 520/85R46 |
Engine Specifications of Challenger, MT685C
Get the specifications for the engine and if different options are available.
| AGCO SISU POWER 84CTA |
| Liquid-cooled |
| 6-cylinder |
| The engine uses AGCO's e3 selective catalytic reduction (SCR) system to reduce nitrogen oxides (NOx). The system uses a diesel exhaust fluid that is injected into the exhaust gas. |
| Turbocharged intercooled diesel |
| Starter type | Electric |
|---|---|
| Torque RPM | 1500 |
| Emissions | Interim Tier 4 |
| Maximum Power | 370 hp [275.9 kW] |
| Power | 340 hp [253.5 kW] |
| Bore/Stroke | 4.37x5.71 inches [111 x 145 mm] |
| Emission control | Selective catalytic reduction (SCR) |
| Displacement | 512.6 ci [8.4 L] |
| Torque | 1136 lb-ft [1540.4 Nm] |
| Rated RPM | 2200 |
| Compression | 16.7:1 |
Transmission Information of Challenger, MT685CY
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Transmission | Dyna-VT |
|---|---|
| Type | Continuously-variable transmission |
| Gears | Infinite forward and reverse |
Mechanical Specs of Challenger, MT685CY
This section summarizes all mechanical information such as the brake system and other specifications.
| Four-wheel drive |
| Cab standard with heat and air-conditioning. Optional heated seat, power adjustable mirrors, and automatic temperature control. |
| Power steering |
| Hydraulic wet disc brakes |
Power Information of Challenger, MT685CY
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Independent |
|---|---|
| Front PTO | Independent OptOptional |
| 540E/1000 (1.375)OptOptional | |
| Clutch | Electro-hydraulic |
| Front PTO Type | 1000 (1.375) |
| Rear PTO Type | 1000E/1000 (1.75) |
Hydraulics Specifications of Challenger, MT685C
Hydraulic system type, pressure, pump flow and valves.
| Type | Closed center load sensing |
|---|---|
| Total flow | 46.2 gpm [174.9 lpm] |
| Pump flow | 26.4 gpm [99.9 lpm] |
| Pressure | 2,901 psi [200.0 bar] |
| Valves | 4 to 6 |
Three-Point Hitch of Challenger, MT685C
Hitch category and rear/front lift capacity.
| Rear Type | III, IV |
|---|---|
| Front lift (at ends) | 11,020 lbs [4998 kg] |
| Front Hitch | III |
| Rear lift (at ends) | 26,460 lbs [12002 kg] |
| Rear lift (at 24"/610mm) | 21,336 lbs [9678 kg] |
Electrical System of Challenger, MT685C
Battery voltage, charging system and ground.
| Ground | Negative |
|---|---|
| Battery CCA | 775 |
| Batteries | 2 |
| Charging system | Alternator |
| Battery volts | 12 |
| Charging amps | 240 *Two 120A alternators. |
Frequently asked questions
How much horsepower does the Challenger MT685C have?
The Challenger MT685C delivers 340 HP.
What years was the Challenger MT685C produced?
The Challenger MT685C was produced in 2009-2010.
What engine does the Challenger MT685C have?
The Challenger MT685C is powered by a The engine uses AGCO's e3 selective catalytic reduction (SCR) system to reduce nitrogen oxides (NOx). The system uses a diesel exhaust fluid that is injected into the exhaust gas., 6-cylinder engine.
What transmission does the Challenger MT685C use?
The Challenger MT685C uses a Dyna-VT transmission.
How much does the Challenger MT685C weigh?
The Challenger MT685C weighs 38,890 lbs [17640 kg].
Is the Challenger MT685C 4WD?
The Challenger MT685C is available in 4WD.