Introduction
Production Information of Farmall, 404
The production information of the tractor (404) includes details about its manufacturing.
| Row-Crop tractor |
| Built in Louisville, Kentucky, USA |
| Manufacturer | Farmall (a part of International Harvester) |
|---|---|
| Total built | 2440 |
Dimension and Tires Information of Farmall, 404
This section sums up the dimension and tires information of the tractor.
| Rear tread | 48 to 80 inches [121 to 203 cm] |
|---|---|
| Wheelbase | 82.2 inches (tricycle) [208 cm] |
| Front tread | 8 inches [20 cm (tricycle)] |
| Height (steering wheel) | 64.1 inches [162 cm] |
| 87.8 inches (wide front) [223 cm] | |
| Rear tread | 48 to 88 inches [121 to 223 cm (long axle)] |
| Front tread | 50 to 82 inches [127 to 208 cm] |
| Length | 94 inches [238 cm] |
| Ag front | 5.00-15 |
|---|---|
| Ag rear | 11.2-36 |
| Ag rear | 12.4-36 |
Engine Specifications of Farmall, 404
Get the specifications for the engine and if different options are available.
| International Harvester C-135 |
| Liquid-cooled |
| LP-gas |
| 4-cylinder |
| Oil capacity | 7 qts [6.6 L] |
|---|---|
| Displacement | 134.8 ci [2.2 L] |
| Compression | 8:1 |
| Bore/Stroke | 3.25x4.0625 inches [83 x 103 mm] |
| Coolant capacity | 15 qts [14.2 L] |
| Coolant capacity | 15 qts [14.2 L] |
| Starter volts | 12 |
| Rated RPM | 2000 |
| Air cleaner | Oil bath |
Transmission Information of Farmall, 404Y
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Type | Gear |
|---|---|
| Oil capacity | 20 qts [18.9 L] |
| Gears | 4 forward and 1 reverse |
| Clutch | 9-inch dry disc |
Transmission variants 2
| Add high range to basic four-speed transmission. |
| Transmission | Dual-Range |
|---|---|
| Oil capacity | 20 qts [18.9 L] |
| Gears | 8 forward and 2 reverse |
| Clutch | 9-inch dry disc |
Transmission variants 3
| Type | Manual shuttle |
|---|---|
| Oil capacity | 20 qts [18.9 L] |
| Gears | 4 forward and reverse |
| Clutch | 9-inch dry disc |
| 4-speed gear |
| 8-speed |
| 4-speed manual shuttle |
Mechanical Specs of Farmall, 404Y
This section summarizes all mechanical information such as the brake system and other specifications.
| Two-wheel drive |
| Open operator station. Optional deluxe deep-cushion seat with padded backrest. |
| Differential mechanical disc brakes |
| Steering | Manual |
|---|---|
| Power (optional) |
Power Information of Farmall, 404Y
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Transmission |
|---|---|
| Rear PTO Type | 540 |
Hydraulics Specifications of Farmall, 404
Hydraulic system type, pressure, pump flow and valves.
| Type | Live |
|---|---|
| 9.3 gpm (optional) [35.2 lpm] | |
| Total flow | 4.5 gpm [17.0 lpm] |
| Capacity | 5 gal [18.9 L] |
| Valves | 1 or 2 |
Three-Point Hitch of Farmall, 404
Hitch category and rear/front lift capacity.
| Rear Type | I |
|---|
Frequently asked questions
How much horsepower does the Farmall 404 have?
The Farmall 404 delivers 40 hp[P] HP.
What years was the Farmall 404 produced?
The Farmall 404 was produced in 1961-1968.
What engine does the Farmall 404 have?
The Farmall 404 is powered by a LP-gas, 4-cylinder engine.
What transmission does the Farmall 404 use?
The Farmall 404 uses a Gear transmission.
Is the Farmall 404 4WD?
The Farmall 404 is available in 2WD.