International Harvester Cub Lo-Boy tractor

International Harvester Cub Lo-Boy

Power

13 hp

Production

1955-1968

Engine

Gasoline, 4-cylinder

Transmission

Sliding gear

Weight

1620 lbs [734 kg]

Drive

2WD

Introduction

Production Information of International Harvester, Cub Lo-Boy

The production information of the tractor (Cub Lo-Boy) includes details about its manufacturing.

The Cub Lo-Boy is very similar to the standard Cub. The Lo-Boy using shorter front end spindles and rotating the final drive made the Lo-Boy about 8 inches shorter than the standard Cub. Both the standard Cub and the Lo-Boy had the IH "Cultivision" offset engine and steering.
Utility tractor
Built in Louisville, Kentucky, USA
ManufacturerInternational Harvester

Dimension and Tires Information of International Harvester, Cub Lo-Boy

This section sums up the dimension and tires information of the tractor.

Clearance (rear axle)14 inches [35 cm]
Wheelbase62 inches [157 cm]
Weight1620 lbs [734 kg]
Height (steering wheel)56.25 inches [142 cm]
Length92 inches [233 cm]
Rear axle1.56 inch diameter [39 mm]
Clearance (front axle)14 inches [35 cm]
Width48.25 inches*Width at minimum tread. [122 cm]
Rear tread40 to 56 inches [101 to 142 cm]
Front tread43 to 55 inches [109 to 139 cm]
Ag front4.00-12
Ag rear8.3-24

Engine Specifications of International Harvester, Cub Lo-Boy

Get the specifications for the engine and if different options are available.

International Harvester C60
Liquid-cooled
4-cylinder
Gasoline
Exhaust valve clearance0.013 inches (cold) [0.330 mm]
Intake valve clearance0.013 inches (cold) [0.330 mm]
Rated RPM1800
12 (late)
Starter volts6 (early)
Displacement59.5 ci [1.0 L]
Power13.4 hp [10.0 kW]
Firing order1-3-4-2
Bore/Stroke2.625x2.75 inches [67 x 70 mm]
Sparkplug gap0.023 inches [0.584 mm]
Coolant capacity9.75 qts [9.2 L]
Oil capacity3 qts [2.8 L]

Transmission Information of International Harvester, Cub Lo-BoyY

Discover all variants of transmission available for this tractor model.

Transmission variants 1

TypeSliding gear
Gears3 forward and 1 reverse
ClutchDry disc

Mechanical Specs of International Harvester, Cub Lo-BoyY

This section summarizes all mechanical information such as the brake system and other specifications.

Two-wheel drive
Open operator station.
Manual steering
Final drivesBull gear

Power Information of International Harvester, Cub Lo-BoyY

Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.

Rear PTOIndependent
Rear PTO TypeCub-10 (0.9375)
Engine RPM-1800@1800

Hydraulics Specifications of International Harvester, Cub Lo-Boy

Hydraulic system type, pressure, pump flow and valves.

TypeOpen center
Pressure1200 psi [82.7 bar]
Pump flow2.8 gpm [10.6 lpm]

Three-Point Hitch of International Harvester, Cub Lo-Boy

Hitch category and rear/front lift capacity.

TypeIH Fast Hitch OptOptional

Electrical System of International Harvester, Cub Lo-Boy

Battery voltage, charging system and ground.

GroundPositive (early)
12 (late)
Negative (late)
Battery volts6 (early)

Frequently asked questions

How much horsepower does the International Harvester Cub Lo-Boy have?

The International Harvester Cub Lo-Boy delivers 13 HP.

What years was the International Harvester Cub Lo-Boy produced?

The International Harvester Cub Lo-Boy was produced in 1955-1968.

What engine does the International Harvester Cub Lo-Boy have?

The International Harvester Cub Lo-Boy is powered by a Gasoline, 4-cylinder engine.

What transmission does the International Harvester Cub Lo-Boy use?

The International Harvester Cub Lo-Boy uses a Sliding gear transmission.

How much does the International Harvester Cub Lo-Boy weigh?

The International Harvester Cub Lo-Boy weighs 1620 lbs [734 kg].

Is the International Harvester Cub Lo-Boy 4WD?

The International Harvester Cub Lo-Boy is available in 2WD.

Compare the International Harvester Cub Lo-Boy with another model