Introduction
Production Information of J.I. Case, 310-B
The production information of the tractor (310-B) includes details about its manufacturing.
| Utility tractor |
| Built in Rock Island, Illinois, USA |
| Manufacturer | J.I. Case |
|---|
Dimension and Tires Information of J.I. Case, 310-B
This section sums up the dimension and tires information of the tractor.
| Rear tread | 48 to 68 inches [121 to 172 cm] |
|---|---|
| Wheelbase | 75.25 inches [191 cm] |
| Weight | 2918 lbs [1323 kg] |
| Height (steering wheel) | 55.5 inches [140 cm] |
| Length | 130.75 inches [332 cm] |
| Front tread | 47.5 inches [120 cm] |
| Width | 61.675 inches [156 cm] |
| Ag front | 6.00-16 |
|---|---|
| 13-24 | |
| Ag rear | 10-24 |
| Ag rear | 11-24 |
| Ag front | 7.50-16 |
Engine Specifications of J.I. Case, 310-B
Get the specifications for the engine and if different options are available.
| Liquid-cooled |
| Sparkplug | Champion D-16 |
|---|---|
| Coolant capacity | 13 qts [12.3 L] |
| Air cleaner | Oil bath |
| Sparkplug gap | 0.025 inches [0.635 mm] |
| Rated RPM | 1900 |
| Idle RPM | 500-2050 |
| Compression | 7.1:1 |
| Displacement | 148 ci [2.4 L] |
| Fuel system | Carburetor |
| Oil capacity | 5 qts [4.7 L] |
| Oil change | 100 h |
| Bore/Stroke | 3.375x4.125 inches [86 x 105 mm] |
| Starter volts | 12 |
| Intake valve clearance | 0.014 inches (cold) [0.356 mm] |
| Exhaust valve clearance | 0.014 inches (cold) [0.356 mm] |
| Starter | Electric |
| Firing order | 1-3-4-2 |
Transmission Information of J.I. Case, 310-BY
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Type | Gear |
|---|---|
| Oil capacity | 17 qts [16.1 L] |
| Gears | 4 forward and 1 reverse |
| Clutch | 235mm dry disc |
Transmission variants 2
| Four gears, plus reverse, in three ranges. |
| Transmission | Tripl-Range |
|---|---|
| Oil capacity | 17 qts [16.1 L] |
| Clutch | 235mm dry disc |
| Type | Gear |
| Gears | 12 forward and 3 reverse |
Transmission variants 3
| 6 | Brakes |
|---|---|
| 4 | Gear shift |
| 3 | Throttle |
| 1 | Foot clutch |
| 5 | Range shift |
| 2 | Hand clutch |
Transmission variants 4
| Type | Shuttle |
|---|---|
| Oil capacity | 17 qts [16.1 L] |
| Gears | 8 forward and reverse |
| Clutch | 235mm dry disc |
| 4-speed gear |
| 12-speed gear |
| 8-speed shuttle |
Mechanical Specs of J.I. Case, 310-BY
This section summarizes all mechanical information such as the brake system and other specifications.
| Two-wheel drive |
| Open operator station. |
| Power steering |
| Differential mechanical dry disc brakes |
Power Information of J.I. Case, 310-BY
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Continuous |
|---|---|
| Rear PTO Type | 540 (1.375) |
| Engine RPM | 533@1750 |
Hydraulics Specifications of J.I. Case, 310-B
Hydraulic system type, pressure, pump flow and valves.
| Type | Open center |
|---|---|
| Capacity | 3 gal [11.4 L] |
| Pressure | 1200 psi [82.7 bar] |
Three-Point Hitch of J.I. Case, 310-B
Hitch category and rear/front lift capacity.
| Type | Eagle Hitch |
|---|
Electrical System of J.I. Case, 310-B
Battery voltage, charging system and ground.
| Ground | Positive |
|---|---|
| Battery AH | 50 |
| Charging system | Generator |
| Battery volts | 12 |
Frequently asked questions
How much horsepower does the J.I. Case 310-B have?
The J.I. Case 310-B delivers 41 hp[P] HP.
What years was the J.I. Case 310-B produced?
The J.I. Case 310-B was produced in 1958-1959.
What transmission does the J.I. Case 310-B use?
The J.I. Case 310-B uses a Gear transmission.
How much does the J.I. Case 310-B weigh?
The J.I. Case 310-B weighs 2918 lbs [1323 kg].
Is the J.I. Case 310-B 4WD?
The J.I. Case 310-B is available in 2WD.