Introduction
Production Information of J.I. Case, 440
The production information of the tractor (440) includes details about its manufacturing.
| Utility tractor |
| Manufacturer | J.I. Case |
|---|---|
| Racine, Wisconsin, USA | |
| Factories | Rock Island, Illinois, USA |
Dimension and Tires Information of J.I. Case, 440
This section sums up the dimension and tires information of the tractor.
| Rear tread | 48 to 76 inches [121 to 193 cm] |
|---|---|
| Wheelbase | 75.25 inches [191 cm] |
| Shipping weight | 3125 lbs [1417 kg] |
| Height (hood) | 50.5 inches [128 cm] |
| Length | 130.2 inches [330 cm] |
| Rear tread | 58/66 inches [147/167 cm] |
| Front tread | 47.5 inches [120 cm] |
| Width | 61.375 inches [155 cm] |
| Ag front | 6.00x16 |
|---|---|
| 13x24 | |
| 7.50x16 | |
| Ag rear | 11x24 |
Engine Specifications of J.I. Case, 440
Get the specifications for the engine and if different options are available.
| Liquid-cooled overhead valve |
| Gasoline |
| 4-cylinder |
| Oil capacity | 5 qts [4.7 L] |
|---|---|
| Displacement | 148 ci [2.4 L] |
| Compression | 7.1:1 |
| Bore/Stroke | 3.375x4.5 inches [86 x 114 mm] |
| Coolant capacity | 12 qts [11.4 L] |
| Starter volts | 12 |
| Rated RPM | 1750 |
| Air cleaner | Oil bath |
Transmission Information of J.I. Case, 440Y
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Type | Unsynchronized gear |
|---|---|
| Gears | 4 forward and 1 reverse |
| Clutch | 234mm dry disc |
Transmission variants 2
| Tripl-Range adds three ranges (low, direct, and high) to the basic four-speed transmission. |
| Transmission | Tripl-Range |
|---|---|
| Clutch | 234mm dry disc |
| Type | Unsynchronized gear |
| Gears | 12 forward and 3 reverse |
Transmission variants 3
| Four gears in two ranges with mechanical shuttle. |
| Transmission | Dual-Range Shuttle |
|---|---|
| Clutch | 279.4mm dry disc |
| Type | Mechanical shuttle |
| Gears | 8 forward and reverse |
| 4-speed unsynchronized gear |
| 12-speed unsynchronized gear |
| 8-speed mechanical shuttle |
Mechanical Specs of J.I. Case, 440Y
This section summarizes all mechanical information such as the brake system and other specifications.
| Two-wheel drive |
| Open operator station |
| Mechanical band/disc brakes |
| Steering | Manual |
|---|---|
| Power (1965 on) |
Power Information of J.I. Case, 440Y
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Live |
|---|---|
| 540/1000 | |
| Independent *Independent PTO optional beginning in 1966. | |
| Rear PTO Type | 540 |
Hydraulics Specifications of J.I. Case, 440
Hydraulic system type, pressure, pump flow and valves.
| Type | Dual-Control |
|---|---|
| Valves | 1 |
Three-Point Hitch of J.I. Case, 440
Hitch category and rear/front lift capacity.
| Rear Type | I |
|---|---|
| Control | Draft-o-Matic draft control |
| Type | Case Eagle Hitch |
Frequently asked questions
How much horsepower does the J.I. Case 440 have?
The J.I. Case 440 delivers 36 hp[P] HP.
What years was the J.I. Case 440 produced?
The J.I. Case 440 was produced in 1960-1969.
What engine does the J.I. Case 440 have?
The J.I. Case 440 is powered by a Gasoline, 4-cylinder engine.
What transmission does the J.I. Case 440 use?
The J.I. Case 440 uses a Unsynchronized gear transmission.
How much does the J.I. Case 440 weigh?
The J.I. Case 440 weighs 3125 lbs [1417 kg].
Is the J.I. Case 440 4WD?
The J.I. Case 440 is available in 2WD.