Introduction
J.I. Case 470 Utility Tractor
The J.I. Case 470 is a utility tractor produced by J.I. Case in Racine, Wisconsin, between 1969 and 1972. As a successor to the Case 430 series, this model was designed to perform a variety of general agricultural tasks with a focus on mechanical reliability.
Engine and Performance
The tractor is powered by a liquid-cooled, four-cylinder gasoline engine, identified as the J.I. Case G148B. With a displacement of 148 cubic inches (2.4 liters), it delivers 37 horsepower at a rated speed of 1750 RPM. The engine features a 7.1:1 compression ratio and uses a standard spark ignition system.
Transmission and Drivetrain
The Case 470 is configured as a two-wheel-drive machine. Power is delivered to the ground through a transmission providing 8 forward gears and 2 reverse gears, allowing for speed adjustment across different field applications. Steering is facilitated by a hydrostatic power system, which reduces operator effort during operation.
Hydraulics and Hitch
The hydraulic system is equipped with a pump providing a flow rate of 8.5 gallons per minute (32.2 liters per minute). The tractor features a Category I rear hitch, compatible with a wide range of standard implements. It is also equipped with an independent rear power take-off (PTO) operating at 540 RPM.
Conclusion
With a total production of 1,808 units and a base weight of 3,600 lbs (1,632 kg), the J.I. Case 470 serves as a compact and functional utility tractor suitable for general farm operations where a reliable, mid-range gasoline-powered machine is required.
Production Information of J.I. Case, 470
- The Case 470 was very similar to the Case 430 series tractors that is replaced.
- Utility tractor
- Built in Racine, Wisconsin, USA
| Manufacturer | J.I. Case |
|---|---|
| Total built | 1,808 |
Dimension and Tires Information of J.I. Case, 470
| Weight | 3,600 lbs [1632 kg] |
|---|
Engine Specifications of J.I. Case, 470
- J.I. Case G148B
- Liquid-cooled
- Gasoline
- 4-cylinder
| Point gap | 0.020 inches [0.508 mm] |
|---|---|
| Displacement | 148 ci [2.4 L] |
| Rated RPM | 1750 |
| Bore/Stroke | 3.375x4.125 inches [86 x 105 mm] |
| Exhaust valve clearance | 0.020 inches (cold) [0.508 mm] |
| Intake valve clearance | 0.014 inches (cold) [0.356 mm] |
| Sparkplug gap | 0.025 inches [0.635 mm] |
| Rated RPM | 1750 |
| Compression | 7.1:1 |
Transmission Information of J.I. Case, 470
Transmission variants 1
| Gears | 8 forward and 2 reverse |
|---|
Mechanical Specs of J.I. Case, 470
- Two-wheel drive
- Open operator station.
| Steering | Hydrostatic power |
|---|
Power Information of J.I. Case, 470
| Rear PTO | Independent |
|---|---|
| Rear PTO Type | 540 |
Hydraulics Specifications of J.I. Case, 470
| Pump flow | 8.5 gpm [32.2 lpm] |
|---|
Three-Point Hitch of J.I. Case, 470
| Rear Type | I |
|---|
Where it sits
Its power puts it in the 27th percentile of 1960s models in our database (709 machines).
Frequently asked questions
How much horsepower does the J.I. Case 470 have?
The J.I. Case 470 delivers 37 hp[P] HP.
What years was the J.I. Case 470 produced?
The J.I. Case 470 was produced in 1969-1972.
What engine does the J.I. Case 470 have?
The J.I. Case 470 is powered by a Gasoline, 4-cylinder engine.
How much does the J.I. Case 470 weigh?
The J.I. Case 470 weighs 3,600 lbs [1632 kg].
Is the J.I. Case 470 4WD?
The J.I. Case 470 is available in 2WD.