J.I. Case 4494 tractor

J.I. Case 4494

Power

213 hp

Production

1984

Engine

Turbocharged diesel, 6-cylinder

Transmission

Partial power shift

Weight

20,840 lbs (18.4-34 duals) [9453 kg]

Drive

4WD

From the same series:

4694

Introduction

Production Information of J.I. Case, 4494

The production information of the tractor (4494) includes details about its manufacturing.

Four-wheel Drive (4WD) tractor
Built in Racine, Wisconsin, USA
ManufacturerJ.I. Case
Original price$78,000 (1985)

Dimension and Tires Information of J.I. Case, 4494

This section sums up the dimension and tires information of the tractor.

Ballasted weight22,450 lbs [10183 kg]
Wheelbase102 inches [259 cm]
Height (exhaust)125 inches [317 cm]
143 inches (duals) [363 cm]
Length225 inches [571 cm]
Ground clearance18 inches (frame) [45 cm]
Operating weight20,840 lbs (18.4-34 duals) [9453 kg]
Width96 inches (minimum) [243 cm]
Rear tread74 to 123 inches [187 to 312 cm]
Front tread74 to 123 inches [187 to 312 cm]
Ag front18.4-34
Ag rear18.4-34

Engine Specifications of J.I. Case, 4494

Get the specifications for the engine and if different options are available.

Case
Liquid-cooled
Turbocharged diesel
6-cylinder
Coolant capacity48 qts [45.4 L]
Air cleanerDual paper elements
Compression15.8:1
Torque560 lb-ft [759.4 Nm]
Rated RPM2200
Displacement504 ci [8.3 L]
Power213 hp [158.8 kW]
Bore/Stroke4.625x5.00 inches [117 x 127 mm]
Oil capacity24 qts [22.7 L]
Starter volts12
Torque RPM1650

Transmission Information of J.I. Case, 4494Y

Discover all variants of transmission available for this tractor model.

Transmission variants 1

Four ranges (1-4) with three power shift gears (1-3) plus reverse in each range. Both shift levers mounted on the dashboard. Range shift lever is to the left in a H-pattern. Gear shift is an inline pattern on the right.
TransmissionPartial power shift
Gears12 forward and 4 reverse
ClutchHydraulic wet disc

Mechanical Specs of J.I. Case, 4494Y

This section summarizes all mechanical information such as the brake system and other specifications.

Silent Guardian cab standard
Hydraulic dry disc brakes
Drive4x4 4WD
SteeringHydraulic, front, rear or four-wheel crab steering

Power Information of J.I. Case, 4494Y

Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.

Rear PTOIndependent (optional)
Rear PTO Type1000
Engine RPM1000@2200

Hydraulics Specifications of J.I. Case, 4494

Hydraulic system type, pressure, pump flow and valves.

TypeClosed center
Total flow31 gpm [117.3 lpm]
Valves2 to 4
Capacity15.5 gal [58.7 L]
Pressure2350 psi [162.0 bar]

Three-Point Hitch of J.I. Case, 4494

Hitch category and rear/front lift capacity.

Rear TypeIII (optional)
Rear lift (at 24"/610mm)12,750 lbs [5783 kg]

Electrical System of J.I. Case, 4494

Battery voltage, charging system and ground.

GroundNegative
Battery volts12

Frequently asked questions

How much horsepower does the J.I. Case 4494 have?

The J.I. Case 4494 delivers 213 HP.

What years was the J.I. Case 4494 produced?

The J.I. Case 4494 was produced in 1984.

What engine does the J.I. Case 4494 have?

The J.I. Case 4494 is powered by a Turbocharged diesel, 6-cylinder engine.

What transmission does the J.I. Case 4494 use?

The J.I. Case 4494 uses a Partial power shift transmission.

How much does the J.I. Case 4494 weigh?

The J.I. Case 4494 weighs 20,840 lbs (18.4-34 duals) [9453 kg].

Is the J.I. Case 4494 4WD?

The J.I. Case 4494 is available in 4WD.

Compare the J.I. Case 4494 with another model