Introduction
J.I. Case 600 Standard-Tread Tractor
The J.I. Case 600 is a standard-tread agricultural tractor produced in 1957 at the Racine, Wisconsin, facility in the United States. Belonging to the broader 500 series lineage manufactured between 1953 and 1956, this two-wheel drive machine was designed for heavy-duty field operations, offering a power output of 77 hp.
Engine and Performance
The tractor is powered by a liquid-cooled, 6-cylinder engine with a displacement of 377 cubic inches (6.2 liters). It operates at a rated speed of 1500 RPM. The engine features an ether injection system for cold-start assistance and utilizes an oil bath air cleaner to maintain intake purity. Maintenance specifications include a 14-quart engine oil capacity and a 56-quart coolant capacity, with intake and exhaust valve clearances set at 0.012 inches when cold.
Transmission and Drivetrain
Power is transferred through a gear-type transmission providing 6 forward speeds and 1 reverse speed. The drivetrain incorporates a mechanical wet disc clutch, which facilitates smooth engagement under load. The tractor is configured as a two-wheel drive unit equipped with disc brakes to ensure reliable stopping power.
Hydraulics and PTO
The hydraulic system utilizes an open-center design with a pump flow capacity of 15 gallons per minute (56.8 lpm) at a pressure of 1000 psi. An optional independent rear PTO is available, operating at 540 RPM. This configuration allows for the efficient operation of various implements requiring hydraulic support or power take-off drive.
Dimensions and Operator Station
The Case 600 features an open operator station designed for visibility and access. It sits on a wheelbase of 87.3 inches, with a total length of 144.3 inches. The tractor has a ground clearance of 14.2 inches, providing sufficient height for field clearance. With a base weight of 7500 lbs, it provides a stable platform for traction-intensive tasks.
Conclusion
With only 1,515 units produced, the J.I. Case 600 remains a significant example of mid-1950s American agricultural engineering. Its combination of a high-displacement 6-cylinder engine and a robust mechanical transmission makes it well-suited for traditional cultivation and heavy drawbar work in a standard-tread configuration.
Production Information of J.I. Case, 600
- Standard-tread tractor
- Built in Racine, Wisconsin, USA
| Manufacturer | J.I. Case |
|---|---|
| Total built | 1,515 |
Dimension and Tires Information of J.I. Case, 600
| Wheelbase | 87.3 inches [221 cm] |
|---|---|
| Front tread | 53.8 inches [136 cm] |
| Ground clearance | 14.2 inches [36 cm] |
| Length | 144.3 inches [366 cm] |
| Rear tread | 67.5 inches [171 cm] |
| Weight | 7500 lbs [3402 kg] |
| Ag front | 7.50-18 |
|---|---|
| Ag front(optional) | 15-30 |
| Ag front(optional) | 14-30 |
| Ag rear | 15-34 |
| Ag rear(optional) | 15-34 |
| Ag rear | 18-26 |
Engine Specifications of J.I. Case, 600
- Liquid-cooled
- 6-cylinder
| Intake valve clearance | 0.012 inches (cold) [0.305 mm] |
|---|---|
| Coolant capacity | 56 qts [53.0 L] |
| Pre-heating | Ether injection |
| Exhaust valve clearance | 0.012 inches (cold) [0.305 mm] |
| Rated RPM | 1500 |
| Idle RPM | 600-1635 |
| Compression | 15:1 |
| Displacement | 377 ci [6.2 L] |
| Air cleaner | Oil bath |
| Oil capacity | 14 qts [13.2 L] |
| Bore/Stroke | 4.00x5.00 inches [102 x 127 mm] |
| Starter volts | 12 |
| Starter | Electric |
| Firing order | 1-5-3-6-2-4 |
Transmission Information of J.I. Case, 600
Transmission variants 1
| Type | Gear |
|---|---|
| Oil type | SAE 90 |
| Oil capacity | 64 qts [60.6 L] |
| Gears | 6 forward and 1 reverse |
| Gears(optional) | SAE 90 |
| Clutch | Mechanical wet disc |
Mechanical Specs of J.I. Case, 600
- Two-wheel drive
- Open operator station.
- Disc brakes
| Steering | Power assist |
|---|
Power Information of J.I. Case, 600
| Rear PTO(optional) | Independent |
|---|---|
| Engine RPM | 540@1475 |
| Clutch | Mechanical wet disc |
| Rear PTO Type | 540 (1.375) |
Hydraulics Specifications of J.I. Case, 600
| Type(optional) | Open center |
|---|---|
| Pump flow | 15 gpm [56.8 lpm] |
| Capacity | 3.5 gal [13.2 L] |
| Pressure | 1000 psi [69.0 bar] |
Electrical System of J.I. Case, 600
| Ground | Negative |
|---|---|
| Battery volts | 6 |
| Batteries | 2 |
| Charging system | Generator |
| Charging amps | 12 |
Where it sits
Its power puts it in the 94th percentile of 1950s models in our database (592 machines).
Frequently asked questions
How much horsepower does the J.I. Case 600 have?
The J.I. Case 600 delivers 77 hp[B] HP.
What years was the J.I. Case 600 produced?
The J.I. Case 600 was produced in 1957.
What engine does the J.I. Case 600 have?
The J.I. Case 600 is powered by a 6-cylinder engine.
What transmission does the J.I. Case 600 use?
The J.I. Case 600 uses a Gear transmission.
How much does the J.I. Case 600 weigh?
The J.I. Case 600 weighs 7500 lbs [3402 kg].
Is the J.I. Case 600 4WD?
The J.I. Case 600 is available in 2WD.