Introduction
Production Information of J.I. Case, 970
The production information of the tractor (970) includes details about its manufacturing.
| Row-Crop tractor |
| Built in Racine, Wisconsin, USA |
| Manufacturer | J.I. Case |
|---|---|
| Total built | 8,542 |
Dimension and Tires Information of J.I. Case, 970
This section sums up the dimension and tires information of the tractor.
| Wide-front Wheelbase | 108 inches [274 cm] |
|---|---|
| Ground clearance | 15 inches [38 cm] |
| Height (hood) | 78 inches [198 cm] |
| Tricycle Wheelbase | 101 inches [256 cm] |
| Length | 162 inches [411 cm] |
| Ag front | 10.00-16 |
|---|---|
| Ag rear | 18.4-38 |
Engine Specifications of J.I. Case, 970
Get the specifications for the engine and if different options are available.
| J.I. Case |
| Liquid-cooled |
| Gasoline |
| 6-cylinder |
| Coolant capacity | 38 qts [36.0 L] |
|---|---|
| Displacement | 377 ci [6.2 L] |
| Compression | 7.5:1 |
| Bore/Stroke | 4.00x5.00 inches [102 x 127 mm] |
| Starter volts | 12 |
| Rated RPM | 1900 |
| Air cleaner | Paper element |
Transmission Information of J.I. Case, 970Y
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Type | Unsynchronized gear |
|---|---|
| Gears | 8 forward and 2 reverse |
| Clutch | 355.6mm dry disc |
Transmission variants 2
| Four gears each with reverse and a three-speed forward powershift. |
| Transmission | Range Power Shift |
|---|---|
| Clutch | Hydraulic wet discs |
| Type | Partial power shift |
| Gears | 12 forward and 4 reverse |
| 8-speed unsynchronized gear |
| 12-speed partial power shift |
Mechanical Specs of J.I. Case, 970Y
This section summarizes all mechanical information such as the brake system and other specifications.
| Two-wheel drive |
| Cab optional |
| Power steering |
| Differential hydraulic dry disc brakes |
Power Information of J.I. Case, 970Y
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Independent |
|---|---|
| 1000@1900 | |
| Engine RPM | 540@1900 |
| Rear PTO Type | 1000 (1.375) |
| 540/1000 (1.375) |
Hydraulics Specifications of J.I. Case, 970
Hydraulic system type, pressure, pump flow and valves.
| Type | Open center |
|---|---|
| Steering flow | 8 gpm [30.3 lpm] |
| Pump flow | 16 gpm [60.6 lpm] |
| Total flow | 24 gpm [90.8 lpm] |
Three-Point Hitch of J.I. Case, 970
Hitch category and rear/front lift capacity.
| Rear Type | II |
|---|
Electrical System of J.I. Case, 970
Battery voltage, charging system and ground.
| Ground | Negative |
|---|---|
| Battery volts | 12 |
| Batteries | 1 (gas) |
| 2 (diesel) |
Frequently asked questions
How much horsepower does the J.I. Case 970 have?
The J.I. Case 970 delivers 95 hp[P] HP.
What years was the J.I. Case 970 produced?
The J.I. Case 970 was produced in 1970-1978.
What engine does the J.I. Case 970 have?
The J.I. Case 970 is powered by a Gasoline, 6-cylinder engine.
What transmission does the J.I. Case 970 use?
The J.I. Case 970 uses a Unsynchronized gear transmission.
Is the J.I. Case 970 4WD?
The J.I. Case 970 is available in 2WD.