Introduction
John Deere 3005 Compact Utility Tractor
The John Deere 3005 is a compact utility tractor produced between 2008 and 2012 at the John Deere facility in Augusta, Georgia, USA. Designed for versatility in property maintenance and light agricultural tasks, this machine combines a lightweight frame with essential power features.
Engine and Performance
The tractor is powered by a 1.3-liter, 3-cylinder liquid-cooled engine featuring direct fuel injection. It delivers a gross rated power of 27 hp (20.5 kW) at an operating speed of 2600 RPM. The engine uses a dry-type air cleaner and provides a compression ratio of 18.1:1.
Transmission and Drivetrain
Equipped with a sliding gear transmission, the 3005 offers 8 forward and 2 reverse gears. It is available in both two-wheel drive and four-wheel drive configurations. Steering is managed via a manual system, with hydrostatic power steering provided as standard on 4WD models and as an option for 2WD units.
Hydraulics and PTO
The open-center hydraulic system provides a total pump flow of 10.3 gpm (39.0 lpm) with a system pressure of 2050 psi (141.3 bar). The rear Power Take-Off (PTO) operates at 540 RPM through a live two-stage clutch. A mid-PTO option running at 2100 RPM is also available for front-mounted or mid-mounted implements.
Dimensions and Hitch
The tractor features a wheelbase of 61 inches (154 cm) and an overall length of 87.8 inches (223 cm). It is equipped with a Category 1 rear three-point hitch, capable of lifting 815 lbs (369 kg) at 24 inches behind the lift point. The machine is fitted with a two-post Roll-Over Protective Structure (ROPS) for operator safety.
Conclusion
The John Deere 3005 is a reliable utility tractor suited for small-scale farming, landscaping, and general property management. Its balance of power, compact dimensions, and available 4WD configuration makes it a practical solution for operators requiring maneuverability in confined spaces.
Production Information of John Deere, 3005
- Compact Utility tractor
- Built in Augusta, Georgia, USA
| Manufacturer | John Deere |
|---|
Dimension and Tires Information of John Deere, 3005
- Flange rear axle
| Wheelbase | 61 inches [154 cm] |
|---|---|
| Height (hood) | 51 inches [129 cm] |
| Width | 54 inches [137 cm] |
| Length | 87.8 inches [223 cm] |
| Height (ROPS) | 82 inches [208 cm] |
| Height (ROPS)(optional) | 111 inches (with 3-point hitch) [281 cm] |
| Standard tires (ag) | Front: 5.00-15. Rear: 11.2-24 (2WD) |
|---|---|
| Standard tires (ag)(optional) | Front: 7.00-14. Rear: 11.2-24 (4WD) |
Engine Specifications of John Deere, 3005
- Liquid-cooled
- 3-cylinder
| Fuel system | Direct injection |
|---|---|
| Rated RPM | 2600 |
| Oil capacity | 4.3 qts [4.1 L] |
| Displacement | 81.2 ci [1.3 L] |
| Bore/Stroke | 3.23x3.31 inches [82 x 84 mm] |
| Rated Power (gross) | 27.5 hp [20.5 kW] |
| Compression | 18.1:1 |
| Air cleaner | Dry |
| Coolant capacity | 5 qts [4.7 L] |
| Starter volts | 12 |
| Operating RPM | 1000-2810 |
Transmission Information of John Deere, 3005
Transmission variants 1
| Type | Sliding gear |
|---|---|
| Gears | 8 forward and 2 reverse |
| Oil capacity | 16 qts [15.1 L] |
Mechanical Specs of John Deere, 3005
- Two- or four-wheel drive
- Two-post ROPS
- Dry shoe brakes
| Steering | Manual |
|---|---|
| Steering(optional) | Hydrostatic power |
Power steering standard with four-wheel drive, optional with two-wheel drive.
Power Information of John Deere, 3005
| Rear PTO | Live (two-stage clutch) |
|---|---|
| Mid PTO Type | 2100 |
| Rear PTO Type | 540 |
| Mid PTO | Optional |
Hydraulics Specifications of John Deere, 3005
| Steering flow | 4.5 gpm [17.0 lpm] |
|---|---|
| Type | Open center |
| Pump flow | 5.8 gpm [22.0 lpm] |
| Valves | 2 |
| Capacity | 4 gal [15.1 L] |
| Total flow | 10.3 gpm [39.0 lpm] |
| Pressure | 2050 psi [141.3 bar] |
Three-Point Hitch of John Deere, 3005
| Rear Type | 1 |
|---|---|
| Rear lift (at 24"/610mm) | 815 lbs [369 kg] |
Electrical System of John Deere, 3005
| Ground | Negative |
|---|---|
| Battery volts | 12 |
| Battery CCA | 500 |
| Charging system | Alternator |
| Charging amps | 40 |
Where it sits
With 27 HP, the John Deere 3005 sits just below 790 (30 HP) in John Deere's range. Its power puts it in the 13th percentile of 2000s models in our database (2822 machines).
Frequently asked questions
How much horsepower does the John Deere 3005 have?
The John Deere 3005 delivers 27 HP.
What years was the John Deere 3005 produced?
The John Deere 3005 was produced in 2008-2012.
What engine does the John Deere 3005 have?
The John Deere 3005 is powered by a 3-cylinder engine.
What transmission does the John Deere 3005 use?
The John Deere 3005 uses a Sliding gear transmission.
Is the John Deere 3005 4WD?
The John Deere 3005 is available in 2WD/4WD.