Introduction
Production Information of John Deere, 40C
The production information of the tractor (40C) includes details about its manufacturing.
| Built in Italy |
| Compact Utility tractor |
| Distributor | John Deere |
|---|---|
| Manufacturer | Goldini |
Dimension and Tires Information of John Deere, 40C
This section sums up the dimension and tires information of the tractor.
| Rear tread | 35.1 to 49.9 inches [89 to 126 cm] |
|---|---|
| Wheelbase | 63.6 inches [161 cm] |
| Weight | 3351 lbs [1520 kg] |
| Height (ROPS) | 78.7 inches [199 cm] |
| Length | 120.8 inches [306 cm] |
| Front tread | 33.4 to 47.5 inches [84 to 120 cm] |
| Width | 43.4 inches*Minimum width [110 cm] |
| Standard tires (ag) | Front: 200/70R16. Rear: 320/70R24 |
|---|
Engine Specifications of John Deere, 40C
Get the specifications for the engine and if different options are available.
| Lombardini LDW 1603 |
| Liquid-cooled |
| 3-cylinder |
| Diesel |
| Coolant capacity | 6.3 qts [6.0 L] |
|---|---|
| Oil capacity | 4.2 qts [4.0 L] |
| Fuel system | Indirect injection |
| Torque | 76.7 lb-ft [104.0 Nm] |
| Rated RPM | 2800 |
| Displacement | 100.7 ci [1.7 L] |
| Rated Power (gross) | 38 hp [28.3 kW] |
| Air cleaner | Dry |
| Bore/Stroke | 3.46x3.56 inches [88 x 90 mm] |
| Starter volts | 12 |
| Starter | Electric |
| Torque RPM | 1650 |
Transmission Information of John Deere, 40CY
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Type | Synchronized |
|---|---|
| Oil capacity | 25.4 qts [24.0 L] |
| Gears | 12 forward and reverse |
| Clutch | Mechanical dry disc |
Mechanical Specs of John Deere, 40CY
This section summarizes all mechanical information such as the brake system and other specifications.
| Four-wheel drive |
| Two-post mid-mount folding ROPS. |
| Power steering |
| Hydraulic wet disc brakes |
Power Information of John Deere, 40CY
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Independent |
|---|---|
| 1000@2620 | |
| Rear PTO Type | 540/1000 |
| Engine RPM | 540@2520 |
Hydraulics Specifications of John Deere, 40C
Hydraulic system type, pressure, pump flow and valves.
| Pressure | 2176 psi [150.0 bar] |
|---|---|
| Pump flow | 8.7 gpm [32.9 lpm] |
Three-Point Hitch of John Deere, 40C
Hitch category and rear/front lift capacity.
| Rear Type | I/IN |
|---|---|
| Rear lift (at ends) | 3086 lbs [1399 kg] |
| Rear lift (at 24"/610mm) | 2205 lbs [1000 kg] |
Electrical System of John Deere, 40C
Battery voltage, charging system and ground.
| Ground | Negative |
|---|---|
| Battery volts | 12 |
| Charging system | Alternator |
| Charging amps | 45 |
Frequently asked questions
How much horsepower does the John Deere 40C have?
The John Deere 40C delivers 38 HP.
What years was the John Deere 40C produced?
The John Deere 40C was produced in 2005-2015.
What engine does the John Deere 40C have?
The John Deere 40C is powered by a Diesel, 3-cylinder engine.
What transmission does the John Deere 40C use?
The John Deere 40C uses a Synchronized transmission.
How much does the John Deere 40C weigh?
The John Deere 40C weighs 3351 lbs [1520 kg].
Is the John Deere 40C 4WD?
The John Deere 40C is available in 4WD.