Introduction
Production Information of John Deere, 4510
The production information of the tractor (4510) includes details about its manufacturing.
| Compact Utility tractor |
| Built in Augusta, Georgia, USA |
| Manufacturer | John Deere |
|---|
Dimension and Tires Information of John Deere, 4510
This section sums up the dimension and tires information of the tractor.
| Wheelbase | 71.5 inches [181 cm] |
|---|---|
| Shipping weight | 3450 lbs [1564 kg] |
| Length | 135 inches [342 cm] |
| Width | 62 inches*Minimum [157 cm] |
| Industrial rear | 17.5L-24 |
|---|---|
| Ag front | 6.00-16 (2WD) |
| 14.9-24 | |
| Ag rear | 13.6-24 |
| 7.00-16 (4WD) | |
| Lawn/turf rear | 44x18.00-20 |
| Lawn/turf front | 27x10.5-15 |
| 8.00-16 (4WD) | |
| Industrial front | 10.00-16.5 (4WD) |
| 22.5LL-16.1 | |
| 27x12LL-15 (4WD) |
Engine Specifications of John Deere, 4510
Get the specifications for the engine and if different options are available.
| Liquid-cooled |
| 4-cylinder |
| Coolant capacity | 6.4 qts [6.1 L] |
|---|---|
| Air cleaner | Dry with safety element |
| Compression | 18:1 |
| Torque | 92 lb-ft [124.8 Nm] |
| Rated RPM | 2600 |
| Displacement | 122 ci [2.0 L] |
| Oil capacity | 5.1 qts [4.8 L] |
| Power (gross) | 38.4 hp [28.6 kW] |
| Bore/Stroke | 3.307x3.543 inches [84 x 90 mm] |
| Starter power | 2.7 hp [2.0 kW] |
| Starter volts | 12 |
| Torque RPM | 1700 |
Transmission Information of John Deere, 4510Y
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| The SyncShift transmission is operated via a gear shift lever and range shift lever. The tractor must be stopped, and clutch used, to change ranges. Gear shifts, within a range, may be made on the move using the clutch. |
| Transmission | SyncShift |
|---|---|
| Oil capacity | 38.8 qts [36.7 L] |
| Type | Partially synchronized |
| Gears | 9 forward and 3 reverse |
Transmission variants 2
| Transmission | PowrReverser |
|---|---|
| Oil capacity | 38.8 qts [36.7 L] |
| Type | Power shuttle |
| Gears | 12 forward and reverse |
| 9-speed partially synchronized |
| 12-speed power shuttle |
Mechanical Specs of John Deere, 4510Y
This section summarizes all mechanical information such as the brake system and other specifications.
| Two- or four-wheel drive |
| Wet disc brakes |
| Power steering |
| Platform with ROPS. |
| Final drives | Planetary |
|---|---|
| Differential lock | Mechanical rear |
Power Information of John Deere, 4510Y
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Independent |
|---|---|
| Mid PTO | Independent OptOptional |
| Engine RPM | 540@2600 |
| Clutch | Wet disc |
| Mid PTO Type | 2100 |
| Rear PTO Type | 540 (1.375) |
Hydraulics Specifications of John Deere, 4510
Hydraulic system type, pressure, pump flow and valves.
| Type | Open center |
|---|---|
| Total flow | 15.9 gpm [60.2 lpm] |
| Pump flow | 10.6 gpm [40.1 lpm] |
| Capacity | 9.7 gal [36.7 L] |
| Steering flow | 5.3 gpm [20.1 lpm] |
| Pressure | 2500 psi [172.4 bar] |
Three-Point Hitch of John Deere, 4510
Hitch category and rear/front lift capacity.
| Rear Type | I |
|---|---|
| Rear lift | 2500 lbs [1134 kg] |
Electrical System of John Deere, 4510
Battery voltage, charging system and ground.
| Ground | Negative |
|---|---|
| Battery volts | 12 |
| Battery CCA | 690 |
| Charging system | Alternator |
| Charging amps | 40 |
Frequently asked questions
How much horsepower does the John Deere 4510 have?
The John Deere 4510 delivers 38 HP.
What years was the John Deere 4510 produced?
The John Deere 4510 was produced in 2002-2004.
What engine does the John Deere 4510 have?
The John Deere 4510 is powered by a 4-cylinder engine.
What transmission does the John Deere 4510 use?
The John Deere 4510 uses a SyncShift transmission.
How much does the John Deere 4510 weigh?
The John Deere 4510 weighs 3450 lbs [1564 kg].
Is the John Deere 4510 4WD?
The John Deere 4510 is available in 2WD/4WD.