Massey Ferguson 6140 tractor

Massey Ferguson 6140

Power

90 hp

Production

1995-1999

Engine

Turbocharged diesel, 4-cylinder

Transmission

Speedshift

Weight

8690 lbs [3941 kg]

Drive

2WD/4WD

From the same series:

6130

Introduction

Production Information of Massey Ferguson, 6140

The production information of the tractor (6140) includes details about its manufacturing.

Utility tractor
ManufacturerMassey Ferguson (a part of AGCO)

Dimension and Tires Information of Massey Ferguson, 6140

This section sums up the dimension and tires information of the tractor.

Height (cab)103.4 inches [262 cm]
2WD Wheelbase93.4 inches [237 cm]
Width101.2 inches [257 cm]
4WD Length160.2 inches [406 cm]
4WD Wheelbase93.5 inches [237 cm]
2WD Weight8690 lbs [3941 kg]
Height (steering wheel)77.6 inches [197 cm]
2WD Length157.3 inches [399 cm]
Clearance (drawbar)15.2 inches [38 cm]
4WD Weight9150 lbs [4150 kg]
Standard tires (ag)Front: 10.00-16. Rear: 16.9R34 (2WD)
Front: 380/70R24. Rear: 480/70R34 (4WD)

Engine Specifications of Massey Ferguson, 6140

Get the specifications for the engine and if different options are available.

Perkins 1004-4T2
Liquid-cooled
Turbocharged diesel
4-cylinder
Exhaust valve clearance0.018 inches*Cold [0.457 mm]
Rated RPM2200
Idle RPM850-2310
Torque RPM1400
Torque265 lb-ft [359.3 Nm]
Displacement244.1 ci [4.0 L]
Power90 hp [67.1 kW]
Bore/Stroke3.937x5.00 inches [100 x 127 mm]
Intake valve clearance0.008 inches*Cold [0.203 mm]
Starter volts12
StarterElectric

Transmission Information of Massey Ferguson, 6140Y

Discover all variants of transmission available for this tractor model.

Transmission variants 1

Four gears in two ranges with two-speed power shift.
TransmissionSpeedshift
ClutchWet disc
TypeTwo-speed power shift
Gears16 forward and reverse

Transmission variants 2

Two ranges, each with four power shift gears in four synchronized ranges plus shuttle.
TransmissionDynashift
ClutchWet disc
TypeFour-speed power shift
Gears32 forward and reverse
16-speed two-speed power shift
32-speed four-speed power shift

Mechanical Specs of Massey Ferguson, 6140Y

This section summarizes all mechanical information such as the brake system and other specifications.

Two- or four-wheel drive
Cab standard.
Wet disc brakes
Power steering
Differential lockElectro-hydraulic front and rear

Power Information of Massey Ferguson, 6140Y

Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.

Engine RPM1000@2040
Rear PTOIndependent
Front PTOIndependent
1000@2000
Rear PTO Type540/1000 (1.375)
Front PTO Type1000
Engine RPM540@1980

Hydraulics Specifications of Massey Ferguson, 6140

Hydraulic system type, pressure, pump flow and valves.

TypeOpen center
Steering press.247 psi [17.0 bar]
Steering flow7.6 gpm [28.8 lpm]
Pressure2600 psi [179.3 bar]
Pump flow13.2 gpm [50.0 lpm]

Three-Point Hitch of Massey Ferguson, 6140

Hitch category and rear/front lift capacity.

Rear TypeII
Rear lift (at 24"/610mm)7562 lbs [3430 kg]

Electrical System of Massey Ferguson, 6140

Battery voltage, charging system and ground.

GroundNegative
Batteries2
Battery volts12

Frequently asked questions

How much horsepower does the Massey Ferguson 6140 have?

The Massey Ferguson 6140 delivers 90 HP.

What years was the Massey Ferguson 6140 produced?

The Massey Ferguson 6140 was produced in 1995-1999.

What engine does the Massey Ferguson 6140 have?

The Massey Ferguson 6140 is powered by a Turbocharged diesel, 4-cylinder engine.

What transmission does the Massey Ferguson 6140 use?

The Massey Ferguson 6140 uses a Speedshift transmission.

How much does the Massey Ferguson 6140 weigh?

The Massey Ferguson 6140 weighs 8690 lbs [3941 kg].

Is the Massey Ferguson 6140 4WD?

The Massey Ferguson 6140 is available in 2WD/4WD.

Compare the Massey Ferguson 6140 with another model