Oliver 1950-T
Power
116 hp[P] hp
Production
1967-1969
Engine
Turbocharged diesel, 6-cylinder
Transmission
Gear
Drive
2WD/4WD
From the same series:
Introduction
Production Information of Oliver, 1950-T
The production information of the tractor (1950-T) includes details about its manufacturing.
| Row-Crop tractor |
| Manufacturer | Oliver |
|---|
Dimension and Tires Information of Oliver, 1950-T
This section sums up the dimension and tires information of the tractor.
| Wheelbase | 109.1 inches [277 cm] |
|---|---|
| Front tread | 67.5 to 91.6 inches [171 to 232 cm] |
| Ground clearance | 25.5 inches [64 cm] |
| Length | 159.5 inches [405 cm] |
| Rear tread | 67 to 109 inches [170 to 276 cm] |
| Height (steering wheel) | 79.4 inches [201 cm] |
No data available
Engine Specifications of Oliver, 1950-T
Get the specifications for the engine and if different options are available.
| Waukesha-Oliver |
| Liquid-cooled |
| Turbocharged diesel |
| 6-cylinder |
| Oil capacity | 11.5 qts [10.9 L] |
|---|---|
| Displacement | 310 ci [5.1 L] |
| Compression | 16:1 |
| Bore/Stroke | 3.875x4.375 inches [98 x 111 mm] |
| Coolant capacity | 20 qts [18.9 L] |
| Starter volts | 12 |
| Rated RPM | 2400 |
| Air cleaner | Dual dry pre-cleaners |
Transmission Information of Oliver, 1950-TY
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Type | Gear |
|---|---|
| Gears | 6 forward and 2 reverse |
| Clutch | 330mm cera-metallic disc |
Transmission variants 2
| Transmission | Hydra-Power |
|---|---|
| Clutch | 330mm cera-metallic disc |
| Type | Two-speed power shift |
| Gears | 12 forward and 6 reverse |
Transmission variants 3
| The Hydraul-Shift provides an on-the-move power shift to a higher or lower range for each of the six forward, and two reverse, gears. |
| Transmission | Hydraul-Shift |
|---|---|
| Clutch | 330mm cera-metallic disc |
| Type | Partial power shift |
| Gears | 18 forward and 6 reverse |
| 6-speed gear |
| 12-speed two-speed power shift |
| 18-speed partial power shift |
Mechanical Specs of Oliver, 1950-TY
This section summarizes all mechanical information such as the brake system and other specifications.
| Two- or four-wheel drive |
| Open operator station. Optional cab. |
| Differential disc brakes |
| Steering | Hydraulic power |
|---|
Power Information of Oliver, 1950-TY
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO Type | 540 |
|---|---|
| 540/1000 |
Hydraulics Specifications of Oliver, 1950-T
Hydraulic system type, pressure, pump flow and valves.
| Type | Open center |
|---|---|
| Pressure | 2050 psi [141.3 bar] |
| Pump flow | 16.7 gpm [63.2 lpm] |
Three-Point Hitch of Oliver, 1950-T
Hitch category and rear/front lift capacity.
| Rear Type | II |
|---|---|
| Rear lift (at ends) | 6000 lbs [2721 kg] |
| III | |
| Control | Position and lower-link draft control |
Frequently asked questions
How much horsepower does the Oliver 1950-T have?
The Oliver 1950-T delivers 116 hp[P] HP.
What years was the Oliver 1950-T produced?
The Oliver 1950-T was produced in 1967-1969.
What engine does the Oliver 1950-T have?
The Oliver 1950-T is powered by a Turbocharged diesel, 6-cylinder engine.
What transmission does the Oliver 1950-T use?
The Oliver 1950-T uses a Gear transmission.
Is the Oliver 1950-T 4WD?
The Oliver 1950-T is available in 2WD/4WD.