Introduction
Snapper ST1842 Lawn Tractor
The Snapper ST1842 is a lawn tractor produced between 2014 and 2024, designed for residential landscaping maintenance. Manufactured by Snapper, a division of Briggs & Stratton, this model is built to provide consistent performance for typical lawn care tasks.
Engine and Performance
The tractor is powered by a single-cylinder, air-cooled Briggs & Stratton Intek gasoline engine with a vertical shaft. It delivers a gross power output of 18.5 hp (13.8 kW). The electrical system is supported by a 12-volt battery with a 230 CCA rating, utilizing an electric starter for operation.
Transmission and Drive System
The ST1842 utilizes a Hydro-Gear T2 belt-driven hydrostatic transmission, which offers infinite forward and reverse speed control, allowing the operator to adjust speed precisely without shifting gears. The machine features a two-wheel drive configuration paired with a manual steering system.
Chassis and Dimensions
The structure includes a durable cast iron front axle to handle standard operational loads. It is equipped with 15x6 front tires and 20x8 rear tires, specifically designed for lawn and turf applications. The unit measures 175 cm in length, 127 cm in width, and 106 cm in height.
Mowing Equipment
The tractor comes standard with a 42-inch mower deck. It includes an independent front power take-off (PTO) engaged by a mechanical clutch, providing the operator with direct control over the mower deck engagement.
Conclusion
With its hydrostatic transmission and 42-inch cutting width, the Snapper ST1842 serves as a functional, mid-range solution for homeowners requiring a reliable machine for lawn mowing and general maintenance within residential properties.
Production Information of Snapper lawn tractors, ST1842
- Lawn tractor
- Original price was $1,599 in 2014
| Manufacturer | Snapper (a part of Briggs & Stratton) |
|---|
Dimension and Tires Information of Snapper lawn tractors, ST1842
| Length | 69 inches [175 cm] |
|---|---|
| Front axle | Cast iron |
| Width | 50 inches [127 cm] |
| Height | 42 inches [106 cm] |
| Lawn/turf front | 15x6 |
|---|---|
| Lawn/turf rear | 20x8 |
Engine Specifications of Snapper lawn tractors, ST1842
- Briggs & Stratton Intek
- Air-cooled vertical shaft
- Gasoline
- 1-cylinder
| Starter volts | 12 |
|---|---|
| Power (gross) | 18.5 hp [13.8 kW] |
| Starter | Electric |
Transmission Information of Snapper lawn tractors, ST1842
Transmission variants 1
| Transmission | Hydro-Gear T2 |
|---|---|
| Type | Belt-driven hydrostatic |
| Gears | Infinite forward and reverse |
Mechanical Specs of Snapper lawn tractors, ST1842
- Two-wheel drive
| Steering | Manual |
|---|
Power Information of Snapper lawn tractors, ST1842
| Front PTO | Independent |
|---|---|
| Clutch | Mechanical |
Electrical System of Snapper lawn tractors, ST1842
| Ground | Negative |
|---|---|
| Battery CCA | 230 |
| Battery volts | 12 |
Where it sits
With 18 HP, the Snapper lawn tractors ST1842 sits between 3317524BVE (17 HP) and NXT 19542 (19 HP) in Snapper lawn tractors's range. Its power puts it in the 17th percentile of 2010s models in our database (783 machines).
Frequently asked questions
How much horsepower does the Snapper lawn tractors ST1842 have?
The Snapper lawn tractors ST1842 delivers 18 HP.
What years was the Snapper lawn tractors ST1842 produced?
The Snapper lawn tractors ST1842 was produced in 2014-2024.
What engine does the Snapper lawn tractors ST1842 have?
The Snapper lawn tractors ST1842 is powered by a Gasoline, 1-cylinder engine.
What transmission does the Snapper lawn tractors ST1842 use?
The Snapper lawn tractors ST1842 uses a Hydro-Gear T2 transmission.
Is the Snapper lawn tractors ST1842 4WD?
The Snapper lawn tractors ST1842 is available in 2WD.