Introduction
Snapper T42 Lawn Tractor
The Snapper T42 is a lawn tractor designed for residential property maintenance. Produced by Ningbo Daye under the Briggs & Stratton umbrella, this machine has been in production since 2025 and is engineered for efficient grass cutting.
Engine and Power
The T42 is powered by a 1-cylinder, air-cooled gasoline engine with a displacement of 540 cc (32.95 ci). It features a bore and stroke of 94 x 78 mm and delivers a gross power output of 19 hp (14.2 kW). The engine is started via a 12-volt electric starter system.
Transmission and Drivetrain
The tractor utilizes a belt-driven Hydro-Gear T2 hydrostatic transmission, providing infinite forward and reverse speed control without the need for manual gear shifting. It is configured with two-wheel drive and manual steering, optimized for maneuverability on lawn surfaces.
Mowing and Equipment
The unit is equipped with a 42-inch mower deck. It features an independent mid-power take-off (PTO) system, which utilizes a pulley-type drive and is engaged through an electric clutch, allowing for precise control of the mower deck operation.
Operator Station and Tires
The tractor features an open operator station design for accessibility. It rides on lawn and turf tires, with 15x6-6 tires on the front and 20x8-8 tires on the rear, designed to minimize soil compaction and provide sufficient traction for typical lawn maintenance tasks.
Conclusion
The Snapper T42 is a dedicated lawn tractor suited for homeowners requiring a compact, user-friendly machine for grass cutting. Its hydrostatic transmission and electric PTO engagement facilitate ease of use for standard mowing operations.
Production Information of Snapper lawn tractors, T42
- Built in China
- Lawn tractor
| Distributor | Snapper (a part of Briggs & Stratton) |
|---|---|
| Manufacturer | Ningbo Daye |
Dimension and Tires Information of Snapper lawn tractors, T42
| Lawn/turf front | 15x6-6 |
|---|---|
| Lawn/turf rear | 20x8-8 |
Engine Specifications of Snapper lawn tractors, T42
- Air-cooled vertical-shaft
- Gasoline
- 1-cylinder
| Power (gross) | 19 hp [14.2 kW] |
|---|---|
| Displacement | 540 cc [32.95 ci] |
| Starter | Electric |
| Bore/Stroke | 3.70x3.06 inches [94 x 78 mm] |
| Starter volts | 12 |
Transmission Information of Snapper lawn tractors, T42
Transmission variants 1
| Transmission | Hydro-Gear T2 |
|---|---|
| Type | Belt-driven hydrostatic |
| Gears | Infinite forward and reverse |
Mechanical Specs of Snapper lawn tractors, T42
- Two-wheel drive
- Manual steering
- Open operator station.
Power Information of Snapper lawn tractors, T42
| Mid PTO | Independent |
|---|---|
| Clutch | Electric |
| Mid PTO Type | Pulley |
Electrical System of Snapper lawn tractors, T42
| Ground | Negative |
|---|---|
| Battery volts | 12 |
Where it sits
With 19 HP, the Snapper lawn tractors T42 sits between Z1804K (18 HP) and 422023BVE (20 HP) in Snapper lawn tractors's range. Its power puts it in the 18th percentile of 2020s models in our database (330 machines).
Frequently asked questions
How much horsepower does the Snapper lawn tractors T42 have?
The Snapper lawn tractors T42 delivers 19 HP.
What years was the Snapper lawn tractors T42 produced?
The Snapper lawn tractors T42 was produced in 2025+.
What engine does the Snapper lawn tractors T42 have?
The Snapper lawn tractors T42 is powered by a Gasoline, 1-cylinder engine.
What transmission does the Snapper lawn tractors T42 use?
The Snapper lawn tractors T42 uses a Hydro-Gear T2 transmission.
Is the Snapper lawn tractors T42 4WD?
The Snapper lawn tractors T42 is available in 2WD.