AGCO DT205B

Name: AGCO DT205B
Brand: AGCO

Power

240 hp

Production

2009-2010

Engine

The engine uses AGCO's e3 selective catalytic reduction (SCR) system to reduce nitrogen oxides (NOx). The system uses a diesel exhaust fluid that is injected into the exhaust gas. The engine could optionally be equipped with an exhaust gas recirculation (EGR) system in place of SCR., 6-cylinder

Transmission

PowerMaxx CVT

Weight

38,890 lbs [17640 kg]

Drive

4WD

Over 200 HP 2000s 2010s

From the same series:

DT225B

Introduction

AGCO DT205B Row-Crop Tractor

The AGCO DT205B is a high-capacity row-crop tractor manufactured in Beauvais, France, between 2009 and 2010. This model, which shares its platform with the Massey Ferguson 8650, is engineered for heavy-duty agricultural operations requiring high power output and precision control.

Engine and Emissions

The tractor is powered by an AGCO SISU POWER 84CTA 6-cylinder diesel engine with a displacement of 8.4 liters. It features a turbocharged, intercooled design with high-pressure common rail fuel injection. The engine delivers a rated power of 240 hp at 2200 RPM and a maximum power of 270 hp. To comply with Tier III emission standards, the unit utilizes the e3 selective catalytic reduction (SCR) system, which injects diesel exhaust fluid to reduce nitrogen oxides. An exhaust gas recirculation (EGR) system was also available as an optional configuration.

Transmission and Drivetrain

Power is managed through a PowerMaxx continuously variable transmission (CVT), providing infinite speed adjustments in both forward and reverse directions. The drivetrain is configured as a four-wheel drive system with inboard planetary final drives. Traction is optimized via a full-locking electro-hydraulic differential lock on both the front and rear axles.

Hydraulics and PTO

The hydraulic system is a closed-center load-sensing design capable of a total flow rate of 46.2 gpm (174.9 lpm) at a pressure of 2,901 psi. It supports four to six valves for implement operation. The rear independent power take-off (PTO) offers 1000E and 1000 RPM speeds, engaged via an electro-hydraulic clutch. An optional front PTO is also available to support front-mounted equipment.

Hitch and Capacities

The DT205B is equipped with a Category 3 rear hitch capable of lifting 26,460 lbs (12,002 kg) at the ends. The front hitch provides an additional lifting capacity of 11,020 lbs (4,998 kg). The drawbar is rated as Category 3, with optional heavy-duty Category 3 and Category 4 configurations available.

Operator Environment

The tractor features a standard cab equipped with heating and air conditioning. Advanced operator options include a heated seat, power-adjustable mirrors, and automatic temperature control. The machine is ISOBUS 11783 compatible and supports the optional Auto-Guide guidance system for precision farming applications.

Conclusion

"With its robust 8.4L engine, CVT transmission, and significant lift capacities, the AGCO DT205B is designed for large-scale row-crop farming. Its combination of high-torque performance and advanced electronic implement management makes it suitable for demanding field work and heavy-duty traction tasks."

Introduction

Production Information of AGCO, DT205B

The production information of the tractor (DT205B) includes details about its manufacturing.

The AGCO DT205B is the same as the Massey Ferguson 8650.

Original price was $185,670 in 2009

Row-Crop tractor

Built in Beauvais, France


Manufacturer	AGCO

Dimension and Tires Information of AGCO, DT205B

This section sums up the dimension and tires information of the tractor.


Bar rear axle	4.33 by 118 inches [109 by 2997 mm]
Wheelbase	122.2 inches [310 cm]
Max weight	38,890 lbs [17640 kg]
Shipping weight	24,250 lbs [10999 kg]
Length	215.7 inches [547 cm]
Bar rear axle	4.33 by 105 inches [109 by 2667 mm (short axle)]
Front axle	Suspension optional
Height (cab)	141 inches [358 cm]
Rear tread	58.5 to 119.5 inches [148 to 303 cm]


	Front: 480/70R34. Rear: 520/85R46
Standard tires (ag)	Front: 420/90R30. Rear: 480/80R46
	Front: 380/85R34. Rear: 480/85R46
	Front: 380/85R34. Rear: 520/85R42
Optional tires (ag)	Front: 420/85R30. Rear: 520/85R42
	Front: 420/85R34. Rear: 480/80R50
	Front: 420/85R34. Rear: 520/85R46
	Front: 420/90R30. Rear: 520/85R42
	Front: 320/85R38. Rear: 320/90R54
	Front: 480/70R34. Rear: 480/80R50

Engine Specifications of AGCO, DT205B

Get the specifications for the engine and if different options are available.

AGCO SISU POWER 84CTA

Liquid-cooled

Turbocharged intercooled diesel

6-cylinder


Rated RPM	2200
Compression	16.7:1
Starter volts	12
Emissions	Tier III
Torque	874 lb-ft [1185.1 Nm]
	Exhaust gas recirculation optional (EGR)
Power	240 hp [179.0 kW]
Emission control	Selective catalytic reduction (SCR)
Bore/Stroke	4.37x5.71 inches [111 x 145 mm]
Displacement	512.6 ci [8.4 L]
Pre-heating	Thermostart
Torque RPM	1500
Starter	Electric
Fuel system	High-pressure common rail
Maximum Power	270 hp [201.3 kW]

Transmission Information of AGCO, DT205BY

Discover all variants of transmission available for this tractor model.

Transmission variants 1


Transmission	PowerMaxx CVT
Type	Continuously variable transmission
Gears	Infinite forward and reverse

Mechanical Specs of AGCO, DT205BY

This section summarizes all mechanical information such as the brake system and other specifications.

Four-wheel drive

Hydraulic wet disc brakes

Power steering

Cab standard with heat and air-conditioning. Optional heated seat, power adjustable mirrors, and automatic temperature control. ISOBUS 11783 compatible. Auto-Guide optional.


Final drives	Inboard planetary
Differential lock	Full locking electro-hydraulic front and rear

Power Information of AGCO, DT205BY

Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.


Front PTO Type	1000
Rear PTO	Independent
	1000E@1605
Engine RPM	1000@1970
Clutch	Electro-hydraulic
Front PTO	Optional
Rear PTO Type	1000E/1000 (1.75)

Hydraulics Specifications of AGCO, DT205B

Hydraulic system type, pressure, pump flow and valves.


Type	Closed center load sensing
Total flow	46.2 gpm [174.9 lpm]
SCV flow	26.4 gpm [99.9 lpm]
Pressure	2,901 psi [200.0 bar]
Valves	4 to 6

Three-Point Hitch of AGCO, DT205B

Hitch category and rear/front lift capacity.


Drawbar	Category 3
Rear Type	3
Front Hitch	3
Rear lift (at 24"/610mm)	21,336 lbs [9678 kg]
	4 OptOptional
	Category 3 Heavy Duty OptOptional
Front lift (at ends)	11,020 lbs [4998 kg]
Rear lift (at ends)	26,460 lbs [12002 kg]
	Category 4 OptOptional

Electrical System of AGCO, DT205B

Battery voltage, charging system and ground.


Ground	Negative
Battery volts	12
Charging system	Alternator
Charging amps	240

Frequently asked questions

How much horsepower does the AGCO DT205B have?

The AGCO DT205B delivers 240 HP.

What years was the AGCO DT205B produced?

The AGCO DT205B was produced in 2009-2010.

What engine does the AGCO DT205B have?

The AGCO DT205B is powered by a The engine uses AGCO's e3 selective catalytic reduction (SCR) system to reduce nitrogen oxides (NOx). The system uses a diesel exhaust fluid that is injected into the exhaust gas. The engine could optionally be equipped with an exhaust gas recirculation (EGR) system in place of SCR., 6-cylinder engine.

What transmission does the AGCO DT205B use?

The AGCO DT205B uses a PowerMaxx CVT transmission.

How much does the AGCO DT205B weigh?

The AGCO DT205B weighs 38,890 lbs [17640 kg].

Is the AGCO DT205B 4WD?

The AGCO DT205B is available in 4WD.

More AGCO models

DT200235 HP · 2002 - 2004 DT200A235 HP · 2005 - 2008 DT225250 HP · 2002 - 2004 DT220A260 HP · 2005 - 2008 DT180215 HP · 2002 - 2004 DT180A215 HP · 2005 - 2008 DT225B265 HP · 2009 - 2010 RT180A215 HP · 2009 - 2011

View all 59 AGCO models →

Compare the AGCO DT205B with another model

Popular comparisons

vs Massey Ferguson 7626 vs Massey Ferguson 7726 vs CaseIH 9330 vs CaseIH Magnum 240 vs New Holland 8970 vs New Holland 9184