Introduction
Production Information of Challenger, MT297B
The production information of the tractor (MT297B) includes details about its manufacturing.
| Built in Matsuyama, Japan |
| Compact Utility tractor |
| Distributor | Challenger (a part of AGCO) |
|---|---|
| Manufacturer | Iseki |
Dimension and Tires Information of Challenger, MT297B
This section sums up the dimension and tires information of the tractor.
| Wheelbase | 79 inches [200 cm] |
|---|---|
| Weight | 4,078 lbs [1849 kg] |
| Height | 91.7 inches [232 cm] |
| Length | 134.6 inches [341 cm] |
| Ground clearance | 15.7 inches [39 cm] |
| Width | 69.7 inches [177 cm] |
| Ag front | 9.5-16 |
|---|---|
| Industrial rear | 18.4-24 |
| Ag rear | 16.9-26 |
| Industrial front | 12-16.5 |
Engine Specifications of Challenger, MT297B
Get the specifications for the engine and if different options are available.
| Iseki |
| Liquid-cooled |
| Diesel |
| 4-cylinder |
| Rated RPM | 2600 |
|---|---|
| Displacement | 180 ci [3.0 L] |
| Starter volts | 12 |
| Power | 59.1 hp [44.1 kW] |
Transmission Information of Challenger, MT297BY
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Three ranges with four gears each. Transmission can be shifted from forward to reverse on the go, without the clutch. In-range gear changes can be made on the go with the clutch. |
| Transmission | PowerShuttle |
|---|---|
| Gears | 12 forward and reverse |
Mechanical Specs of Challenger, MT297BY
This section summarizes all mechanical information such as the brake system and other specifications.
| Four-wheel drive |
| Two-post folding ROPS. |
| Power steering |
| Wet disc brakes |
Power Information of Challenger, MT297BY
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Independent |
|---|---|
| Rear PTO Type | 540 (1.375) |
Hydraulics Specifications of Challenger, MT297B
Hydraulic system type, pressure, pump flow and valves.
| Type | Open center |
|---|---|
| Steering flow | 6.0 gpm [22.7 lpm] |
| Total flow | 17.5 gpm [66.2 lpm] |
| Pressure | 2276 psi [156.9 bar] |
| Pump flow | 11.5 gpm [43.5 lpm] |
Three-Point Hitch of Challenger, MT297B
Hitch category and rear/front lift capacity.
| Rear Type | II/I |
|---|---|
| Rear lift (at ends) | 3748 lbs [1700 kg] |
| Rear lift (at 24"/610mm) | 3307 lbs [1500 kg] |
Electrical System of Challenger, MT297B
Battery voltage, charging system and ground.
| Ground | Negative |
|---|---|
| Charging system | Alternator |
| Battery volts | 12 |
Frequently asked questions
How much horsepower does the Challenger MT297B have?
The Challenger MT297B delivers 59 HP.
What years was the Challenger MT297B produced?
The Challenger MT297B was produced in 2005-2008.
What engine does the Challenger MT297B have?
The Challenger MT297B is powered by a Diesel, 4-cylinder engine.
What transmission does the Challenger MT297B use?
The Challenger MT297B uses a PowerShuttle transmission.
How much does the Challenger MT297B weigh?
The Challenger MT297B weighs 4,078 lbs [1849 kg].
Is the Challenger MT297B 4WD?
The Challenger MT297B is available in 4WD.