Tractor-Info.comScrollOnTop
Introduction
Production Information of Challenger, MT295B
The production information of the tractor (MT295B) includes details about its manufacturing.
| Original price was $25,000 in 2005 |
| Built in Matsuyama, Japan |
| Compact Utility tractor |
| Distributor | Challenger (a part of AGCO) |
|---|---|
| Manufacturer | Iseki |
Dimension and Tires Information of Challenger, MT295B
This section sums up the dimension and tires information of the tractor.
| Flange rear axle | 48.8 inch length [1239 mm] |
|---|---|
| Wheelbase | 76 inches [193 cm] |
| Ground clearance | 13.2 inches [33 cm] |
| Height (ROPS) | 89.1 inches [226 cm] |
| Length | 132.7 inches [337 cm] |
| Front axle | Flange: 55.7 inch length [1414 mm] |
| Width | 65.4 inches*Minimum width [166 cm] |
| Ag front | 9.5-16 |
|---|---|
| Industrial front | 10-16.5 |
| Lawn/turf rear | 44x18.00-20 |
| Ag rear | 16.9-24 |
| Industrial rear | 17.5L-24 |
| Lawn/turf front | 27x10.50-15 |
Engine Specifications of Challenger, MT295B
Get the specifications for the engine and if different options are available.
| Iseki E4DD |
| Liquid-cooled |
| Diesel |
| 4-cylinder |
| Oil capacity | 8.5 qts [8.0 L] |
|---|---|
| Starter volts | 12 |
| Power (gross) | 52.1 hp [38.9 kW] |
| Coolant capacity | 8 qts [7.6 L] |
| Air cleaner | Dual-stage dry |
| Pre-heating | Glow plugs |
| Fuel system | Indirect injection |
| Displacement | 180.3 ci [3.0 L] |
| Power (net) | 50 hp [37.3 kW] |
| Bore/Stroke | 3.82x3.94 inches [97 x 100 mm] |
| Idle RPM | 975-2750 |
| Rated RPM | 2600 |
| Compression | 21.5:1 |
Transmission Information of Challenger, MT295BY
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Four non-synchronized gears in two non-synchronized ranges, with synchronized shuttle shift. |
| Transmission | SynchroShuttle |
|---|---|
| Oil capacity | 40.2 qts [38.0 L] |
| Gears | 8 forward and reverse |
| Clutch | Dry |
Transmission variants 2
| Three ranges with four gears each. Transmission can be shifted from forward to reverse on the go, without the clutch. In-range gear changes can be made on the go with the clutch. |
| Transmission | PowerShuttle |
|---|---|
| Oil capacity | 40.2 qts [38.0 L] |
| Clutch | Dry main, wet shuttle |
| Type | Partially synchronized |
| Gears | 12 forward and reverse |
Transmission variants 3
| Four push-button power shift gears in three non-synchronized ranges. Power shuttle shifting with left-hand console lever. Only available on the MT295B with a cab. |
| Transmission | AutoPower IV |
|---|---|
| Oil capacity | 40.2 qts [38.0 L] |
| Clutch | Mechanical wet disc |
| Type | Partial power shift |
| Gears | 12 forward and reverse |
| 8-speed |
| 12-speed partially synchronized |
| 12-speed partial power shift |
Mechanical Specs of Challenger, MT295BY
This section summarizes all mechanical information such as the brake system and other specifications.
| Four-wheel drive |
| Wet disc brakes |
| Power steering |
| Two-post foldable ROPS. Cab optional with air-conditioning. |
| Final drives | Spur gear |
|---|---|
| Differential lock | Mechanical rear |
Power Information of Challenger, MT295BY
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Independent |
|---|---|
| Clutch | Electro-hydraulic wet disc |
| Rear PTO Type | 540 |