Introduction
Production Information of Challenger, MT275B
The production information of the tractor (MT275B) includes details about its manufacturing.
| Built in Matsuyama, Japan |
| Compact Utility tractor |
| Distributor | Challenger (a part of AGCO) |
|---|---|
| Manufacturer | Iseki |
Dimension and Tires Information of Challenger, MT275B
This section sums up the dimension and tires information of the tractor.
| Flange rear axle | 44.6 inch length [1132 mm] |
|---|---|
| Wheelbase | 69.7 inches [177 cm] |
| Ground clearance | 14.1 inches [35 cm] |
| Height (ROPS) | 87.4 inches [221 cm] |
| Length | 121 inches [307 cm] |
| Front tread | 45 inches [114 cm] |
| Front axle | Flange: 48.8 inch length [1239 mm] |
| Width | 62.2 inches*Minimum width [157 cm] |
| Industrial rear | 14.9-24 |
|---|---|
| Ag front | 8-16 |
| Lawn/turf rear | 41x14.00-20 |
| Lawn/turf front | 27x8.50-15 |
| Ag rear | 12.4-24 |
| Industrial front | 10-16.5 |
| 13.6-24 |
Engine Specifications of Challenger, MT275B
Get the specifications for the engine and if different options are available.
| Iseki E3CD-VTB10 |
| Liquid-cooled |
| Turbocharged diesel |
| 3-cylinder |
| Oil capacity | 5 qts [4.7 L] |
|---|---|
| Starter volts | 12 |
| Power (gross) | 40.1 hp [29.9 kW] |
| Coolant capacity | 7.1 qts [6.7 L] |
| Air cleaner | Dual-stage dry |
| Pre-heating | Glow plugs |
| Fuel system | Indirect injection |
| Displacement | 91.4 ci [1.5 L] |
| Power (net) | 38 hp [28.3 kW] |
| Bore/Stroke | 3.43x3.30 inches [87 x 84 mm] |
| Idle RPM | 980-2860 |
| Rated RPM | 2600 |
| Compression | 21.7:1 |
Transmission Information of Challenger, MT275BY
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Type | Hydrostatic |
|---|---|
| Gears | Infinite forward and reverse (3-range) |
| Oil capacity | 32.8 qts [31.0 L] |
Transmission variants 2
| Four non-synchronized gears in two non-synchronized ranges, with synchronized shuttle shift. |
| Transmission | SynchroShuttle |
|---|---|
| Oil capacity | 32.8 qts [31.0 L] |
| Gears | 8 forward and reverse |
| Clutch | Mechanical dry disc |
Transmission variants 3
| Three ranges with four gears each. Transmission can be shifted from forward to reverse on the go, without the clutch. In-range gear changes can be made on the go with the clutch. |
| Transmission | PowerShuttle |
|---|---|
| Oil capacity | 32.8 qts [31.0 L] |
| Clutch | Dry main, wet shuttle |
| Type | Partially synchronized with power shuttle |
| Gears | 12 forward and reverse |
| Hydrostatic |
| 8-speed |
| 12-speed partially synchronized with power shuttle |
Mechanical Specs of Challenger, MT275BY
This section summarizes all mechanical information such as the brake system and other specifications.
| Four-wheel drive |
| Wet disc brakes |
| Power steering |
| Two-post foldable ROPS |
| Final drives | Spur gear |
|---|---|
| Differential lock | Mechanical rear |
Power Information of Challenger, MT275BY
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Independent |
|---|---|
| Mid PTO Type | 2000 (1.00) |
| Mid PTO | Independent OptOptional |
| Clutch | Electro-hydraulic wet disc |
| Rear PTO Type | 540 (1.375) |
Hydraulics Specifications of Challenger, MT275B
Hydraulic system type, pressure, pump flow and valves.
| Steering press. | 2276 psi [156.9 bar] |
|---|---|
| Type | Open center |
| Mid valves | 2 OptOptional |
| Rear valves | 2 OptOptional |
| Capacity | 8.2 gal [31.0 L] |
| 13.7 gpm (power shuttle/hydro) [51.9 lpm] | |
| Pump flow | 8.3 gpm [31.4 lpm] |
| Pressure | 2276 psi [156.9 bar] |
| 5.4 gpm (power shuttle/hydro) [20.4 lpm] | |
| Steering flow | 4.4 gpm (sync shuttle) [16.7 lpm] |
| Total flow | 12.7 gpm (sync shuttle) [48.1 lpm] |
Three-Point Hitch of Challenger, MT275B
Hitch category and rear/front lift capacity.
| Telescopic link ends (power shuttle/hydro) | |
| Rear Type | I |
| Rear lift (at 24"/610mm) | 2535 lbs [1149 kg] |
| Rear lift (at ends) | 2800 lbs [1270 kg] |
| Control | Position and response control |
| Rear Arms | Fixed link ends ((sync shuttle) |
| Optional top-link draft control |
Electrical System of Challenger, MT275B
Battery voltage, charging system and ground.
| Ground | Negative |
|---|---|
| Battery volts | 12 |
| Battery CCA | 630 |
| Charging system | Alternator |
| Charging amps | 40 |
Frequently asked questions
How much horsepower does the Challenger MT275B have?
The Challenger MT275B delivers 40 HP.
What years was the Challenger MT275B produced?
The Challenger MT275B was produced in 2005-2008.
What engine does the Challenger MT275B have?
The Challenger MT275B is powered by a Turbocharged diesel, 3-cylinder engine.
What transmission does the Challenger MT275B use?
The Challenger MT275B uses a Hydrostatic transmission.
Is the Challenger MT275B 4WD?
The Challenger MT275B is available in 4WD.