Introduction
Production Information of Challenger, MT295
The production information of the tractor (MT295) includes details about its manufacturing.
| Built in Matsuyama, Japan |
| Compact Utility tractor |
| Distributor | Challenger (a part of AGCO) |
|---|---|
| Manufacturer | Iseki |
Dimension and Tires Information of Challenger, MT295
This section sums up the dimension and tires information of the tractor.
| Hydro Weight | 4331 lbs [1964 kg] |
|---|---|
| Wheelbase | 76 inches [193 cm] |
| Height (Folded ROPS) | 72.7 inches [184 cm] |
| Height (ROPS) | 95.9 inches [243 cm] |
| Length | 140.9 inches [357 cm] |
| Front tread | 52.5 inches [133 cm] |
| Gear Weight | 4277 lbs [1940 kg] |
| Width | 71.5 inches [181 cm] |
| Rear tread | 52 to 60 inches [132 to 152 cm] |
| Industrial rear | 17.5-24 |
|---|---|
| Standard tires (ag) | Front: 9.5-16. Rear: 13.6-28 |
| Lawn/turf rear | 570-648 |
| Lawn/turf front | 27x12LL-15 |
| Lawn/turf front | 29x12.00-15 |
| Industrial front | 10-16.5 |
| Lawn/turf rear | 475/65D-20 |
Engine Specifications of Challenger, MT295
Get the specifications for the engine and if different options are available.
| Iseki |
| Liquid-cooled |
| Diesel |
| 4-cylinder |
| Power (gross) | 44.2 hp [33.0 kW] |
|---|---|
| Displacement | 134.1 ci [2.2 L] |
| Rated RPM | 2500 |
| Bore/Stroke | 3.43x3.64 inches [87 x 92 mm] |
| Starter volts | 12 |
| Starter | Electric |
Transmission Information of Challenger, MT295Y
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Four synchronized gears (1-4) in four ranges with power shuttle. |
| Type | Power shuttle |
|---|---|
| Gears | 16 forward and reverse |
Transmission variants 2
| Type | Hydrostatic |
|---|---|
| Gears | Infinite forward and reverse (4-range) |
| 16-speed power shuttle |
| Hydrostatic |
Mechanical Specs of Challenger, MT295Y
This section summarizes all mechanical information such as the brake system and other specifications.
| Four-wheel drive |
| Two-post folding ROPS. |
| Wet disc brakes |
| Power steering |
| Differential lock | Mechanical rear |
|---|
Power Information of Challenger, MT295Y
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Independent |
|---|---|
| Mid PTO Type | 2000 |
| Mid PTO | Independent *Optional, available only with hydrostatic transmission. |
| Clutch | Wet disc |
| Rear PTO Type | 540 (1.375) |
Hydraulics Specifications of Challenger, MT295
Hydraulic system type, pressure, pump flow and valves.
| Type | Open center |
|---|---|
| Steering flow | 5.2 gpm [19.7 lpm] |
| Total flow | 12.6 gpm [47.7 lpm] |
| Pressure | 2275 psi [156.9 bar] |
| Pump flow | 7.4 gpm [28.0 lpm] |
Three-Point Hitch of Challenger, MT295
Hitch category and rear/front lift capacity.
| Rear Type | I |
|---|---|
| Rear lift (at 24"/610mm) | 2600 lbs [1179 kg] |
| Control | Position and draft control |
| Rear lift (at ends) | 3086 lbs [1399 kg] |
Electrical System of Challenger, MT295
Battery voltage, charging system and ground.
| Ground | Negative |
|---|---|
| Charging system | Alternator |
| Battery volts | 12 |
Frequently asked questions
How much horsepower does the Challenger MT295 have?
The Challenger MT295 delivers 44 HP.
What years was the Challenger MT295 produced?
The Challenger MT295 was produced in 2003-2005.
What engine does the Challenger MT295 have?
The Challenger MT295 is powered by a Diesel, 4-cylinder engine.
What transmission does the Challenger MT295 use?
The Challenger MT295 uses a Power shuttle transmission.
How much does the Challenger MT295 weigh?
The Challenger MT295 weighs 4331 lbs [1964 kg].
Is the Challenger MT295 4WD?
The Challenger MT295 is available in 4WD.