Introduction
Production Information of Challenger, MT275
The production information of the tractor (MT275) includes details about its manufacturing.
| Built in Matsuyama, Japan |
| Compact Utility tractor |
| Distributor | Challenger (a part of AGCO) |
|---|---|
| Manufacturer | Iseki |
Dimension and Tires Information of Challenger, MT275
This section sums up the dimension and tires information of the tractor.
| Front tread | 44 inches [111 cm] |
|---|---|
| Wheelbase | 68.5 inches [173 cm] |
| Height (Folded ROPS) | 70.8 inches [179 cm] |
| Height (ROPS) | 93.2 inches [236 cm] |
| Length | 118.5 inches [300 cm] |
| Rear tread | 45 to 56.8 inches [114 to 144 cm] |
| Weight | 3,107 lbs [1409 kg] |
| Width | 60.6 inches [153 cm] |
| Industrial rear | 15-19.5 |
|---|---|
| Standard tires (ag) | Front: 8-16. Rear: 13.6-24 |
| Lawn/turf rear | 610R470 |
| Lawn/turf front | 305R343 |
| Lawn/turf front | 212/80D-15 |
| Industrial front | 10-16.5 |
| Industrial front | 25x8.50-14 |
| Lawn/turf rear | 355/80D-20 |
| Industrial rear | 14.9-24 |
Engine Specifications of Challenger, MT275
Get the specifications for the engine and if different options are available.
| Iseki |
| Liquid-cooled |
| Turbocharged diesel |
| 3-cylinder |
| Power (gross) | 40.1 hp [29.9 kW] |
|---|---|
| Displacement | 91.4 ci [1.5 L] |
| Rated RPM | 2600 |
| Bore/Stroke | 3.43x3.30 inches [87 x 84 mm] |
| Starter volts | 12 |
| Starter | Electric |
Transmission Information of Challenger, MT275Y
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Type | Mechanical shuttle |
|---|---|
| Gears | 8 forward and reverse |
| Clutch | Dry disc |
Mechanical Specs of Challenger, MT275Y
This section summarizes all mechanical information such as the brake system and other specifications.
| Four-wheel drive |
| Two-post folding ROPS. |
| Wet disc brakes |
| Power steering |
| Differential lock | Mechanical rear |
|---|
Power Information of Challenger, MT275Y
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Independent |
|---|---|
| Mid PTO Type | 2000 |
| Mid PTO | Independent OptOptional |
| Clutch | Wet disc |
| Rear PTO Type | 540 (1.375) |
Hydraulics Specifications of Challenger, MT275
Hydraulic system type, pressure, pump flow and valves.
| Type | Open center |
|---|---|
| Steering flow | 4.5 gpm [17.0 lpm] |
| Total flow | 12.2 gpm [46.2 lpm] |
| Pressure | 2130 psi [146.9 bar] |
| Pump flow | 7.7 gpm [29.1 lpm] |
Three-Point Hitch of Challenger, MT275
Hitch category and rear/front lift capacity.
| Rear Type | I |
|---|---|
| Rear lift (at 24"/610mm) | 2,100 lbs [952 kg] |
| Rear lift (at ends) | 2,755 lbs [1249 kg] |
| Control | Position control |
| Draft control OptOptional |
Electrical System of Challenger, MT275
Battery voltage, charging system and ground.
| Ground | Negative |
|---|---|
| Charging system | Alternator |
| Battery volts | 12 |
Frequently asked questions
How much horsepower does the Challenger MT275 have?
The Challenger MT275 delivers 40 HP.
What years was the Challenger MT275 produced?
The Challenger MT275 was produced in 2003-2005.
What engine does the Challenger MT275 have?
The Challenger MT275 is powered by a Turbocharged diesel, 3-cylinder engine.
What transmission does the Challenger MT275 use?
The Challenger MT275 uses a Mechanical shuttle transmission.
How much does the Challenger MT275 weigh?
The Challenger MT275 weighs 3,107 lbs [1409 kg].
Is the Challenger MT275 4WD?
The Challenger MT275 is available in 4WD.