Introduction
Production Information of Challenger, MT255
The production information of the tractor (MT255) includes details about its manufacturing.
| Built in Matsuyama, Japan |
| Compact Utility tractor |
| Distributor | Challenger (a part of AGCO) |
|---|---|
| Manufacturer | Iseki |
Dimension and Tires Information of Challenger, MT255
This section sums up the dimension and tires information of the tractor.
| Rear tread | 37.2 to 37.25 inches [94 to 94 cm] |
|---|---|
| Wheelbase | 64.5 inches [163 cm] |
| Weight | 2,248 lbs [1019 kg] |
| Height (ROPS) | 79.3 inches [201 cm] |
| Length | 116.5 inches [295 cm] |
| Front tread | 42 inches [106 cm] |
| Width | 51 inches [129 cm] |
| Standard tires (ag) | Front: 6-14. Rear: 12.4-16 |
|---|---|
| Industrial rear | 12.5/80-18 |
| Industrial front | 25x8.50-14 |
| Lawn/turf front | 24x8.50-12 |
| Lawn/turf rear | 315/80D-16 |
Engine Specifications of Challenger, MT255
Get the specifications for the engine and if different options are available.
| Iseki |
| Liquid-cooled |
| Diesel |
| 3-cylinder |
| Power (gross) | 28.4 hp [21.2 kW] |
|---|---|
| Displacement | 89.3 ci [1.5 L] |
| Rated RPM | 2500 |
| Bore/Stroke | 3.39x3.30 inches [86 x 84 mm] |
| Starter volts | 12 |
| Starter | Electric |
Transmission Information of Challenger, MT255Y
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Type | Constant mesh |
|---|---|
| Gears | 9 forward and 3 reverse |
Mechanical Specs of Challenger, MT255Y
This section summarizes all mechanical information such as the brake system and other specifications.
| Four-wheel drive |
| Two-post fixed ROPS. |
| Wet disc brakes |
| Power steering |
| Differential lock | Mechanical rear |
|---|
Power Information of Challenger, MT255Y
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Live |
|---|---|
| Mid PTO Type | 2000 |
| Mid PTO | Optional |
| Clutch | Dry disc |
| Rear PTO Type | 540 (1.375) |
Hydraulics Specifications of Challenger, MT255
Hydraulic system type, pressure, pump flow and valves.
| Type | Open center |
|---|---|
| Steering flow | 2.5 gpm [9.5 lpm] |
| Total flow | 9.9 gpm [37.5 lpm] |
| Pressure | 2130 psi [146.9 bar] |
| Pump flow | 7.4 gpm [28.0 lpm] |
Three-Point Hitch of Challenger, MT255
Hitch category and rear/front lift capacity.
| Rear Type | I |
|---|---|
| Rear lift (at 24"/610mm) | 1,323 lbs [600 kg] |
| Rear lift (at ends) | 1,984 lbs [899 kg] |
| Control | Position control |
| Draft control OptOptional |
Electrical System of Challenger, MT255
Battery voltage, charging system and ground.
| Ground | Negative |
|---|---|
| Charging system | Alternator |
| Battery volts | 12 |
Frequently asked questions
How much horsepower does the Challenger MT255 have?
The Challenger MT255 delivers 28 HP.
What years was the Challenger MT255 produced?
The Challenger MT255 was produced in 2003-2005.
What engine does the Challenger MT255 have?
The Challenger MT255 is powered by a Diesel, 3-cylinder engine.
What transmission does the Challenger MT255 use?
The Challenger MT255 uses a Constant mesh transmission.
How much does the Challenger MT255 weigh?
The Challenger MT255 weighs 2,248 lbs [1019 kg].
Is the Challenger MT255 4WD?
The Challenger MT255 is available in 4WD.