Challenger MT225
Power
23 hp
Production
2003-2005
Engine
Diesel, 3-cylinder
Transmission
Hydrostatic
Weight
1,672 lbs [758 kg]
Drive
4WD
From the same series:
Introduction
Production Information of Challenger, MT225
The production information of the tractor (MT225) includes details about its manufacturing.
| Built in Matsuyama, Japan |
| Compact Utility tractor |
| Distributor | Challenger (a part of AGCO) |
|---|---|
| Manufacturer | Iseki |
Dimension and Tires Information of Challenger, MT225
This section sums up the dimension and tires information of the tractor.
| Rear tread | 35 inches [88 cm] |
|---|---|
| Wheelbase | 59.5 inches [151 cm] |
| Weight | 1,672 lbs [758 kg] |
| Height (ROPS) | 75.2 inches [191 cm] |
| Length | 105.4 inches [267 cm] |
| Front tread | 36.5 inches [92 cm] |
| Width | 41 inches [104 cm] |
| Standard tires (ag) | Front: 5.00-12. Rear: 9.5-16 |
|---|---|
| Industrial rear | 12-16.5 |
| Industrial front | 23x8.50-12 |
| Lawn/turf front | 23x10.50-12 |
| Lawn/turf rear | 315/75D-15 |
Engine Specifications of Challenger, MT225
Get the specifications for the engine and if different options are available.
| Iseki |
| Liquid-cooled |
| Diesel |
| 3-cylinder |
| Power (gross) | 23.3 hp [17.4 kW] |
|---|---|
| Displacement | 68.5 ci [1.1 L] |
| Rated RPM | 2800 |
| Bore/Stroke | 3.08x3.07 inches [78 x 78 mm] |
| Starter volts | 12 |
| Starter | Electric |
Transmission Information of Challenger, MT225Y
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Type | Hydrostatic |
|---|---|
| Gears | Infinite forward and reverse (2-range) |
Mechanical Specs of Challenger, MT225Y
This section summarizes all mechanical information such as the brake system and other specifications.
| Four-wheel drive |
| Two-post fixed ROPS. |
| Dry shoe brakes |
| Power steering |
| Differential lock | Mechanical rear |
|---|
Power Information of Challenger, MT225Y
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Independent |
|---|---|
| Mid PTO Type | 2000 |
| Rear PTO Type | 540 (1.375) |
| Mid PTO | Independent |
Hydraulics Specifications of Challenger, MT225
Hydraulic system type, pressure, pump flow and valves.
| Type | Open center |
|---|---|
| Steering flow | 2.5 gpm [9.5 lpm] |
| Total flow | 7.9 gpm [29.9 lpm] |
| Pressure | 1930 psi [133.1 bar] |
| Pump flow | 5.4 gpm [20.4 lpm] |
Three-Point Hitch of Challenger, MT225
Hitch category and rear/front lift capacity.
| Rear Type | I |
|---|---|
| Rear lift (at 24"/610mm) | 694 lbs [314 kg] |
| Control | Position control |
| Rear lift (at ends) | 1,210 lbs [548 kg] |
Electrical System of Challenger, MT225
Battery voltage, charging system and ground.
| Ground | Negative |
|---|---|
| Charging system | Alternator |
| Battery volts | 12 |
Frequently asked questions
How much horsepower does the Challenger MT225 have?
The Challenger MT225 delivers 23 HP.
What years was the Challenger MT225 produced?
The Challenger MT225 was produced in 2003-2005.
What engine does the Challenger MT225 have?
The Challenger MT225 is powered by a Diesel, 3-cylinder engine.
What transmission does the Challenger MT225 use?
The Challenger MT225 uses a Hydrostatic transmission.
How much does the Challenger MT225 weigh?
The Challenger MT225 weighs 1,672 lbs [758 kg].
Is the Challenger MT225 4WD?
The Challenger MT225 is available in 4WD.