Introduction
Production Information of Challenger, MT285
The production information of the tractor (MT285) includes details about its manufacturing.
| Built in Matsuyama, Japan |
| Compact Utility tractor |
| Distributor | Challenger (a part of AGCO) |
|---|---|
| Manufacturer | Iseki |
Dimension and Tires Information of Challenger, MT285
This section sums up the dimension and tires information of the tractor.
| Front tread | 44 inches [111 cm] |
|---|---|
| Wheelbase | 68.5 inches [173 cm] |
| Height (Folded ROPS) | 70.8 inches [179 cm] |
| Height (ROPS) | 93.2 inches [236 cm] |
| Length | 121.5 inches [308 cm] |
| Rear tread | 45 to 56.8 inches [114 to 144 cm] |
| Weight | 3,174 lbs [1439 kg] |
| Width | 60.6 inches [153 cm] |
| Industrial rear | 15-19.5 |
|---|---|
| Standard tires (ag) | Front: 8-16. Rear: 13.6-24 |
| Lawn/turf rear | 610R470 |
| Lawn/turf front | 305R343 |
| Lawn/turf front | 212/80D-15 |
| Industrial front | 10-16.5 |
| Industrial front | 25x8.50-14 |
| Lawn/turf rear | 355/80D-20 |
| Industrial rear | 14.9-24 |
Engine Specifications of Challenger, MT285
Get the specifications for the engine and if different options are available.
| Iseki |
| Liquid-cooled |
| Turbocharged diesel |
| 3-cylinder |
| Power (gross) | 40.1 hp [29.9 kW] |
|---|---|
| Displacement | 91.4 ci [1.5 L] |
| Rated RPM | 2600 |
| Bore/Stroke | 3.43x3.30 inches [87 x 84 mm] |
| Starter volts | 12 |
| Starter | Electric |
Transmission Information of Challenger, MT285Y
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Four synchronized gears (1-4) in four ranges with power shuttle. |
| Type | Power shuttle |
|---|---|
| Gears | 16 forward and reverse |
Transmission variants 2
| Type | Hydrostatic |
|---|---|
| Gears | Infinite forward and reverse (3-range) |
| 16-speed power shuttle |
| Hydrostatic |
Mechanical Specs of Challenger, MT285Y
This section summarizes all mechanical information such as the brake system and other specifications.
| Four-wheel drive |
| Two-post folding ROPS. |
| Wet disc brakes |
| Power steering |
| Differential lock | Mechanical rear |
|---|
Power Information of Challenger, MT285Y
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Independent |
|---|---|
| Mid PTO Type | 2000 |
| Mid PTO | Independent OptOptional |
| Clutch | Wet disc |
| Rear PTO Type | 540 (1.375) |
Hydraulics Specifications of Challenger, MT285
Hydraulic system type, pressure, pump flow and valves.
| Type | Open center |
|---|---|
| 9.6 gpm (hydro) [36.3 lpm] | |
| Total flow | 12.2 gpm (gear) [46.2 lpm] |
| Pressure | 2130 psi [146.9 bar] |
| Steering flow | 4.5 gpm [17.0 lpm] |
| Pump flow | 7.7 gpm [29.1 lpm] |
Three-Point Hitch of Challenger, MT285
Hitch category and rear/front lift capacity.
| 1,940 lbs (hydro) [879 kg] | |
| Rear Type | I |
| 2,866 lbs (hydro) [1300 kg] | |
| Rear lift (at ends) | 2,755 lbs (gear) [1249 kg] |
| Control | Position control |
| Rear lift (at 24"/610mm) | 2,100 lbs (gear) [952 kg] |
| Draft control OptOptional |
Electrical System of Challenger, MT285
Battery voltage, charging system and ground.
| Ground | Negative |
|---|---|
| Charging system | Alternator |
| Battery volts | 12 |
Frequently asked questions
How much horsepower does the Challenger MT285 have?
The Challenger MT285 delivers 40 HP.
What years was the Challenger MT285 produced?
The Challenger MT285 was produced in 2003-2005.
What engine does the Challenger MT285 have?
The Challenger MT285 is powered by a Turbocharged diesel, 3-cylinder engine.
What transmission does the Challenger MT285 use?
The Challenger MT285 uses a Power shuttle transmission.
How much does the Challenger MT285 weigh?
The Challenger MT285 weighs 3,174 lbs [1439 kg].
Is the Challenger MT285 4WD?
The Challenger MT285 is available in 4WD.