Introduction
Production Information of Challenger, MT265
The production information of the tractor (MT265) includes details about its manufacturing.
| Built in Matsuyama, Japan |
| Compact Utility tractor |
| Distributor | Challenger (a part of AGCO) |
|---|---|
| Manufacturer | Iseki |
Dimension and Tires Information of Challenger, MT265
This section sums up the dimension and tires information of the tractor.
| Front tread | 44 inches [111 cm] |
|---|---|
| Wheelbase | 68.5 inches [173 cm] |
| Height (Folded ROPS) | 70.8 inches [179 cm] |
| Height (ROPS) | 93.2 inches [236 cm] |
| Length | 121.5 inches [308 cm] |
| Rear tread | 45 to 56.8 inches [114 to 144 cm] |
| Weight | 3,041 lbs [1379 kg] |
| Width | 60.6 inches [153 cm] |
| Industrial rear | 15-19.5 |
|---|---|
| Standard tires (ag) | Front: 7-16. Rear: 12.6-24 |
| Lawn/turf rear | 610R470 |
| Lawn/turf front | 305R343 |
| Lawn/turf front | 212/80D-15 |
| Industrial front | 10-16.5 |
| Industrial front | 25x8.50-14 |
| Lawn/turf rear | 355/80D-20 |
| Industrial rear | 14.9-24 |
Engine Specifications of Challenger, MT265
Get the specifications for the engine and if different options are available.
| Iseki |
| Liquid-cooled |
| Diesel |
| 3-cylinder |
| Power (gross) | 33 hp [24.6 kW] |
|---|---|
| Displacement | 91.4 ci [1.5 L] |
| Rated RPM | 2600 |
| Bore/Stroke | 3.43x3.30 inches [87 x 84 mm] |
| Starter volts | 12 |
| Starter | Electric |
Transmission Information of Challenger, MT265Y
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Four synchronized gears (1-4) in four ranges with power shuttle. |
| Type | Power shuttle |
|---|---|
| Gears | 16 forward and reverse |
Transmission variants 2
| Type | Hydrostatic |
|---|---|
| Gears | Infinite forward and reverse (3-range) |
| 16-speed power shuttle |
| Hydrostatic |
Mechanical Specs of Challenger, MT265Y
This section summarizes all mechanical information such as the brake system and other specifications.
| Four-wheel drive |
| Two-post folding ROPS. |
| Wet disc brakes |
| Power steering |
| Differential lock | Mechanical rear |
|---|
Power Information of Challenger, MT265Y
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Independent |
|---|---|
| Mid PTO Type | 2000 |
| Mid PTO | Independent OptOptional |
| Clutch | Wet disc |
| Rear PTO Type | 540 (1.375) |
Hydraulics Specifications of Challenger, MT265
Hydraulic system type, pressure, pump flow and valves.
| Type | Open center |
|---|---|
| Steering flow | 4.5 gpm [17.0 lpm] |
| 9.6 gpm (hydro) [36.3 lpm] | |
| Pump flow | 7.7 gpm [29.1 lpm] |
| Total flow | 12.2 gpm (gear) [46.2 lpm] |
Three-Point Hitch of Challenger, MT265
Hitch category and rear/front lift capacity.
| 1,940 lbs (hydro) [879 kg] | |
| Rear Type | I |
| 2,866 lbs (hydro) [1300 kg] | |
| Rear lift (at ends) | 2,755 lbs (gear) [1249 kg] |
| Control | Position control |
| Rear lift (at 24"/610mm) | 2,100 lbs (gear) [952 kg] |
| Draft control OptOptional |
Electrical System of Challenger, MT265
Battery voltage, charging system and ground.
| Ground | Negative |
|---|---|
| Charging system | Alternator |
| Battery volts | 12 |
Frequently asked questions
How much horsepower does the Challenger MT265 have?
The Challenger MT265 delivers 33 HP.
What years was the Challenger MT265 produced?
The Challenger MT265 was produced in 2003-2005.
What engine does the Challenger MT265 have?
The Challenger MT265 is powered by a Diesel, 3-cylinder engine.
What transmission does the Challenger MT265 use?
The Challenger MT265 uses a Power shuttle transmission.
How much does the Challenger MT265 weigh?
The Challenger MT265 weighs 3,041 lbs [1379 kg].
Is the Challenger MT265 4WD?
The Challenger MT265 is available in 4WD.