AGCO DT250B
Power
290 hp
Production
2009-2010
Engine
The engine uses AGCO's e3 selective catalytic reduction (SCR) system to reduce nitrogen oxides (NOx). The system uses a diesel exhaust fluid that is injected into the exhaust gas. The engine could optionally be equipped with an exhaust gas recirculation (EGR) system in place of SCR., 6-cylinder
Transmission
PowerMaxx CVT
Weight
38890 lbs [17640 kg]
Drive
4WD
From the same series:
Introduction
Production Information of AGCO, DT250B
The production information of the tractor (DT250B) includes details about its manufacturing.
| The AGCO DT250B is the same as a Massey Ferguson 8670. |
| Original price was $215,339 in 2009 |
| Row-Crop tractor |
| Built in Beauvais, France |
| Manufacturer | AGCO |
|---|
Dimension and Tires Information of AGCO, DT250B
This section sums up the dimension and tires information of the tractor.
| Bar rear axle | 4.33 by 118 inches [109 by 2997 mm] |
|---|---|
| Wheelbase | 122.2 inches [310 cm] |
| Max weight | 38890 lbs [17640 kg] |
| Shipping weight | 24250 lbs [10999 kg] |
| Length | 215.7 inches [547 cm] |
| Bar rear axle | 4.33 by 105 inches [109 by 2667 mm (short axle)] |
| Front axle | Suspension optional |
| Height (cab) | 141 inches [358 cm] |
| Rear tread | 58.5 to 119.5 inches [148 to 303 cm] |
| Front: 420/85R34. Rear: 520/85R46 | |
| Standard tires (ag) | Front: 420/85R34. Rear: 480/80R50 |
| Front: 420/90R30. Rear: 480/80R46 | |
| Front: 380/85R34. Rear: 520/85R42 | |
| Optional tires (ag) | Front: 420/85R30. Rear: 520/85R42 |
| Front: 480/70R34. Rear: 520/85R46 | |
| Front: 380/85R34. Rear: 480/80R46 | |
| Front: 420/90R30. Rear: 520/85R42 | |
| Front: 320/85R38. Rear: 320 | |
| Front: 480/70R34. Rear: 480/80R50 |
Engine Specifications of AGCO, DT250B
Get the specifications for the engine and if different options are available.
| AGCO SISU POWER 84CTA |
| Liquid-cooled |
| The engine uses AGCO's e3 selective catalytic reduction (SCR) system to reduce nitrogen oxides (NOx). The system uses a diesel exhaust fluid that is injected into the exhaust gas. The engine could optionally be equipped with an exhaust gas recirculation (EGR) system in place of SCR. |
| Turbocharged intercooled diesel |
| 6-cylinder |
| Rated RPM | 2200 |
|---|---|
| Compression | 16.7:1 |
| Starter volts | 12 |
| Emissions | Tier III |
| Torque | 1033 lb-ft [1400.7 Nm] |
| Exhaust gas recirculation optional (EGR) | |
| Power | 290 hp [216.3 kW] |
| Emission control | Selective catalytic reduction (SCR) |
| Bore/Stroke | 4.37x5.71 inches [111 x 145 mm] |
| Displacement | 512.6 ci [8.4 L] |
| Pre-heating | Thermostart |
| Torque RPM | 1500 |
| Starter | Electric |
| Fuel system | High-pressure common rail |
| Maximum Power | 320 hp [238.6 kW] |
Transmission Information of AGCO, DT250BY
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Transmission | PowerMaxx CVT |
|---|---|
| Type | Continuously variable transmission |
| Gears | Infinite forward and reverse |
Mechanical Specs of AGCO, DT250BY
This section summarizes all mechanical information such as the brake system and other specifications.
| Four-wheel drive |
| Hydraulic wet disc brakes |
| Power steering |
| Cab standard with heat and air-conditioning. Optional heated seat, power adjustable mirrors, and automatic temperature control. ISOBUS 11783 compatible. Auto-Guide optonal. |
| Final drives | Inboard planetary |
|---|---|
| Differential lock | Full locking electro-hydraulic front and rear |
Power Information of AGCO, DT250BY
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Front PTO Type | 1000 |
|---|---|
| Rear PTO | Independent |
| 1000E@1605 | |
| Engine RPM | 1000@1970 |
| Clutch | Electro-hydraulic |
| Front PTO | Optional |
| Rear PTO Type | 1000E/1000 (1.75) |
Hydraulics Specifications of AGCO, DT250B
Hydraulic system type, pressure, pump flow and valves.
| Type | Closed center load sensing |
|---|---|
| Total flow | 46.2 gpm [174.9 lpm] |
| SCV flow | 26.4 gpm [99.9 lpm] |
| Pressure | 2,901 psi [200.0 bar] |
| Valves | 4 to 6 |
Three-Point Hitch of AGCO, DT250B
Hitch category and rear/front lift capacity.
| Drawbar | Category 3 |
|---|---|
| Rear Type | 3 |
| Front Hitch | 3 |
| Rear lift (at 24"/610mm) | 21,336 lbs [9678 kg] |
| 4 OptOptional | |
| Category 3 Heavy Duty OptOptional | |
| Front lift (at ends) | 11,020 lbs [4998 kg] |
| Rear lift (at ends) | 26,460 lbs [12002 kg] |
| Category 4 OptOptional |
Electrical System of AGCO, DT250B
Battery voltage, charging system and ground.
| Ground | Negative |
|---|---|
| Battery volts | 12 |
| Charging system | Alternator |
| Charging amps | 240 |
Frequently asked questions
How much horsepower does the AGCO DT250B have?
The AGCO DT250B delivers 290 HP.
What years was the AGCO DT250B produced?
The AGCO DT250B was produced in 2009-2010.
What engine does the AGCO DT250B have?
The AGCO DT250B is powered by a The engine uses AGCO's e3 selective catalytic reduction (SCR) system to reduce nitrogen oxides (NOx). The system uses a diesel exhaust fluid that is injected into the exhaust gas. The engine could optionally be equipped with an exhaust gas recirculation (EGR) system in place of SCR., 6-cylinder engine.
What transmission does the AGCO DT250B use?
The AGCO DT250B uses a PowerMaxx CVT transmission.
How much does the AGCO DT250B weigh?
The AGCO DT250B weighs 38890 lbs [17640 kg].
Is the AGCO DT250B 4WD?
The AGCO DT250B is available in 4WD.