Challenger MT485E
Power
140 hp
Production
2017-2020
Engine
Intercooled turbocharged diesel, 4-cylinder
Transmission
AutoPower IV
Weight
15432 lbs [6999 kg]
Drive
4WD
From the same series:
Introduction
Production Information of Challenger, MT485E
The production information of the tractor (MT485E) includes details about its manufacturing.
| Utility tractor |
| Built in France |
| Manufacturer | Challenger (a part of AGCO) |
|---|
Dimension and Tires Information of Challenger, MT485E
This section sums up the dimension and tires information of the tractor.
| Bar rear axle |
| Flange rear axle |
| Wheelbase | 105 inches [266 cm] |
|---|---|
| Width | 72 inches*Minimum width [182 cm] |
| Shipping weight | 15432 lbs [6999 kg] |
No data available
Engine Specifications of Challenger, MT485E
Get the specifications for the engine and if different options are available.
| AGCO Power |
| Liquid-cooled |
| 4-cylinder |
| Intercooled turbocharged diesel |
| Starter volts | 12 |
|---|---|
| Starter | Electric |
| Emission control | Selective catalytic reduction |
| Fuel system | High-pressure common rail direct injection |
| Maximum Power | 150 hp [111.9 kW] |
| Displacement | 299 ci [4.9 L] |
| Emissions | Tier IV |
| Power | 140 hp [104.4 kW] |
| Bore/Stroke | 4.251x5.276 inches [108 x 134 mm] |
| Torque RPM | 1600 |
| Torque | 623 lb-ft [844.8 Nm] |
| Rated RPM | 2100 |
Transmission Information of Challenger, MT485EY
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Transmission | AutoPower IV |
|---|---|
| Clutch | Hydraulic wet disc |
| Type | Four-speed power shift |
| Gears | 16 forward and reverse |
Transmission variants 2
| Transmission | AutoPower VI |
|---|---|
| Clutch | Hydraulic wet disc |
| Type | Six-speed power shift |
| Gears | 24 forward and reverse |
Transmission variants 3
| Transmission | TechStar CVT |
|---|---|
| Type | Continuously-variable transmission |
| Gears | Infinite forward and reverse |
| 16-speed four-speed power shift |
| 24-speed six-speed power shift |
| Continuously-variable transmission |
Mechanical Specs of Challenger, MT485EY
This section summarizes all mechanical information such as the brake system and other specifications.
| Four-wheel drive |
| Cab standard with air-conditioning. Auto-Guide 3000 ((Optional)) |
| Hydraulic wet disc brakes |
| Power steering |
| Differential lock | Electro-hydraulic front and rear |
|---|
Power Information of Challenger, MT485EY
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Independent |
|---|---|
| Rear PTO Type | 540/1000 |
| 540/540E/1000/1000E |
Hydraulics Specifications of Challenger, MT485E
Hydraulic system type, pressure, pump flow and valves.
| Type | Open center |
|---|---|
| 50 gpmOptOptional [189.2 lpm] | |
| 29 gpmOptOptional [109.8 lpm] | |
| Valves | Up to 5 |
| Pump flow | 26 gpm [98.4 lpm] |
Three-Point Hitch of Challenger, MT485E
Hitch category and rear/front lift capacity.
| Rear Type | III/II |
|---|---|
| Rear lift (at 24"/610mm) | 11244 lbs [5100 kg] |
| Rear Arms | Telescopic link end |
Electrical System of Challenger, MT485E
Battery voltage, charging system and ground.
| Ground | Negative |
|---|---|
| Battery volts | 12 |
| 240 *Total charging capacity with optional twin 120A system. | |
| Charging system | Alternator |
| Charging amps | 175 |
Frequently asked questions
How much horsepower does the Challenger MT485E have?
The Challenger MT485E delivers 140 HP.
What years was the Challenger MT485E produced?
The Challenger MT485E was produced in 2017-2020.
What engine does the Challenger MT485E have?
The Challenger MT485E is powered by a Intercooled turbocharged diesel, 4-cylinder engine.
What transmission does the Challenger MT485E use?
The Challenger MT485E uses a AutoPower IV transmission.
How much does the Challenger MT485E weigh?
The Challenger MT485E weighs 15432 lbs [6999 kg].
Is the Challenger MT485E 4WD?
The Challenger MT485E is available in 4WD.