Challenger MT495E
Power
150 hp
Production
2017-2020
Engine
Intercooled turbocharged diesel, 4-cylinder
Transmission
AutoPower VI
Weight
15432 lbs [6999 kg]
Drive
4WD
From the same series:
Introduction
Production Information of Challenger, MT495E
The production information of the tractor (MT495E) includes details about its manufacturing.
| Utility tractor |
| Built in France |
| Manufacturer | Challenger (a part of AGCO) |
|---|
Dimension and Tires Information of Challenger, MT495E
This section sums up the dimension and tires information of the tractor.
| Bar rear axle |
| Flange rear axle |
| Wheelbase | 105 inches [266 cm] |
|---|---|
| Width | 72 inches*Minimum width [182 cm] |
| Shipping weight | 15432 lbs [6999 kg] |
No data available
Engine Specifications of Challenger, MT495E
Get the specifications for the engine and if different options are available.
| AGCO Power |
| Liquid-cooled |
| 4-cylinder |
| Intercooled turbocharged diesel |
| Starter volts | 12 |
|---|---|
| Starter | Electric |
| Emission control | Selective catalytic reduction |
| Fuel system | High-pressure common rail direct injection |
| Maximum Power | 160 hp [119.3 kW] |
| Displacement | 299 ci [4.9 L] |
| Emissions | Tier IV |
| Power | 150 hp [111.9 kW] |
| Bore/Stroke | 4.251x5.276 inches [108 x 134 mm] |
| Torque RPM | 1600 |
| Torque | 652 lb-ft [884.1 Nm] |
| Rated RPM | 2100 |
Transmission Information of Challenger, MT495EY
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Transmission | AutoPower VI |
|---|---|
| Clutch | Hydraulic wet disc |
| Type | Six-speed power shift |
| Gears | 24 forward and reverse |
Transmission variants 2
| Transmission | TechStar CVT |
|---|---|
| Type | Continuously-variable transmission |
| Gears | Infinite forward and reverse |
| 24-speed six-speed power shift |
| Continuously-variable transmission |
Mechanical Specs of Challenger, MT495EY
This section summarizes all mechanical information such as the brake system and other specifications.
| Four-wheel drive |
| Cab standard with air-conditioning. Auto-Guide 3000 ((Optional)) |
| Hydraulic wet disc brakes |
| Power steering |
| Differential lock | Electro-hydraulic front and rear |
|---|
Power Information of Challenger, MT495EY
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Independent |
|---|---|
| Rear PTO Type | 540/1000 |
| 540/540E/1000/1000E |
Hydraulics Specifications of Challenger, MT495E
Hydraulic system type, pressure, pump flow and valves.
| Type | Open center |
|---|---|
| 50 gpmOptOptional [189.2 lpm] | |
| 29 gpmOptOptional [109.8 lpm] | |
| Valves | Up to 5 |
| Pump flow | 26 gpm [98.4 lpm] |
Three-Point Hitch of Challenger, MT495E
Hitch category and rear/front lift capacity.
| Rear Type | III/II |
|---|---|
| Rear lift (at 24"/610mm) | 11244 lbs [5100 kg] |
| Rear Arms | Telescopic link end |
Electrical System of Challenger, MT495E
Battery voltage, charging system and ground.
| Ground | Negative |
|---|---|
| Battery volts | 12 |
| 240 *Total charging capacity with optional twin 120A system. | |
| Charging system | Alternator |
| Charging amps | 175 |
Frequently asked questions
How much horsepower does the Challenger MT495E have?
The Challenger MT495E delivers 150 HP.
What years was the Challenger MT495E produced?
The Challenger MT495E was produced in 2017-2020.
What engine does the Challenger MT495E have?
The Challenger MT495E is powered by a Intercooled turbocharged diesel, 4-cylinder engine.
What transmission does the Challenger MT495E use?
The Challenger MT495E uses a AutoPower VI transmission.
How much does the Challenger MT495E weigh?
The Challenger MT495E weighs 15432 lbs [6999 kg].
Is the Challenger MT495E 4WD?
The Challenger MT495E is available in 4WD.