Challenger MT495D
Power
150 hp
Production
2014-2016
Engine
Turbocharged air-to-air intercooled diesel, 4-cylinder 16-valve
Transmission
AutoPower VI
Weight
12500 lbs [5670 kg]
Drive
4WD
From the same series:
Introduction
Production Information of Challenger, MT495D
The production information of the tractor (MT495D) includes details about its manufacturing.
| Utility tractor |
| Manufacturer | Challenger (a part of AGCO) |
|---|
Dimension and Tires Information of Challenger, MT495D
This section sums up the dimension and tires information of the tractor.
| Flange rear axle |
| Bar rear axle | 3.74 by 113 inches [94 by 2870 mm] |
|---|---|
| Wheelbase | 105 inches [266 cm] |
| Bar rear axle | 3.23 by 105 inches [82 by 2667 mm] |
| Bar rear axle | 3.23 by 80 inches [82 by 2032 mm] |
| Shipping weight | 12500 lbs [5670 kg] |
| Bar rear axle | 3.74 by 90 inches [94 by 2286 mm] |
No data available
Engine Specifications of Challenger, MT495D
Get the specifications for the engine and if different options are available.
| AGCO Power 49AWI |
| Liquid-cooled |
| Turbocharged air-to-air intercooled diesel |
| 4-cylinder 16-valve |
| Starter volts | 12 |
|---|---|
| Emission control | Selective catalytic reduction (SCR) |
| Power (gross) | 150 hp [111.9 kW] |
| Air cleaner | Dual dry element |
| Fuel system | Electronic high pressure common rail |
| Displacement | 299 ci [4.9 L] |
| Emissions | Interim Tier IV |
| Bore/Stroke | 4.251x5.276 inches [108 x 134 mm] |
| Starter | Electric |
| Rated RPM | 2200 |
| Pre-heating | Thermostart |
Transmission Information of Challenger, MT495DY
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Six power shift gears in four ranges. |
| Transmission | AutoPower VI |
|---|---|
| Type | Six speed power shift |
| Gears | 24 forward and reverse |
Transmission variants 2
| Transmission | Techstar CVT |
|---|---|
| Type | Continuously variable transmission (CVT) |
| Gears | Infinite forward and reverse |
| 24-speed six speed power shift |
| Continuously variable transmission (CVT) |
Mechanical Specs of Challenger, MT495DY
This section summarizes all mechanical information such as the brake system and other specifications.
| Four-wheel drive |
| Cab standard with air-conditioning. |
| Wet disc brakes |
| Steering | Hydrostatic power |
|---|
Power Information of Challenger, MT495DY
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Independent |
|---|---|
| 540/540E/1000/1000E | |
| Rear PTO Type | 540/1000 |
| 540/540E/1000 |
Hydraulics Specifications of Challenger, MT495D
Hydraulic system type, pressure, pump flow and valves.
| Type | Closed center load sensing (CCLS) |
|---|---|
| -unknown- | |
| SCV flow | 15 gpm (open center) [56.8 lpm] |
| Open center optional | |
| 29 gpm (CCLS) [109.8 lpm] | |
| Valves | 2 to 4 |
Three-Point Hitch of Challenger, MT495D
Hitch category and rear/front lift capacity.
| Rear Type | III/II |
|---|---|
| Drawbar | Cat. 2 |
| Control | Electronic lower link draft sensing |
| Rear lift (at 24"/610mm) | 11400 lbs [5171 kg] |
Electrical System of Challenger, MT495D
Battery voltage, charging system and ground.
| Battery CCA | 600 |
|---|---|
| Ground | Negative |
| 350 (2x 175) | |
| 240 (2x 120) | |
| Charging system | Alternator |
| Battery volts | 12 |
| Batteries | 2 |
| Charging amps | 175 |
Frequently asked questions
How much horsepower does the Challenger MT495D have?
The Challenger MT495D delivers 150 HP.
What years was the Challenger MT495D produced?
The Challenger MT495D was produced in 2014-2016.
What engine does the Challenger MT495D have?
The Challenger MT495D is powered by a Turbocharged air-to-air intercooled diesel, 4-cylinder 16-valve engine.
What transmission does the Challenger MT495D use?
The Challenger MT495D uses a AutoPower VI transmission.
How much does the Challenger MT495D weigh?
The Challenger MT495D weighs 12500 lbs [5670 kg].
Is the Challenger MT495D 4WD?
The Challenger MT495D is available in 4WD.