Challenger MT575E tractor

Challenger MT575E

Power

200 hp

Production

2015-2020

Engine

Turbocharged intercooled diesel, 6-cylinder

Transmission

AutoPower VI

Drive

4WD

From the same series:

MT565E
MT585E

Introduction

Production Information of Challenger, MT575E

The production information of the tractor (MT575E) includes details about its manufacturing.

Row-Crop tractor
Built in Jackson, Minnesota, USA
ManufacturerChallenger (a part of AGCO)

Dimension and Tires Information of Challenger, MT575E

This section sums up the dimension and tires information of the tractor.

Wheelbase117 inches [297 cm]

No data available

Engine Specifications of Challenger, MT575E

Get the specifications for the engine and if different options are available.

AGCO Power
Liquid-cooled
Turbocharged intercooled diesel
6-cylinder
Starter volts12
Emission controlSelective catalytic reduction (SCR)
Rated Power (gross)200 hp [149.1 kW]
Air cleanerDry element
Maximum Power (gross)240 hp [179.0 kW]
Displacement449 ci [7.4 L]
EmissionsTier IV
Bore/Stroke4.252x5.276 inches [108 x 134 mm]
StarterElectric
Rated RPM2100
Compression17.8:1

Transmission Information of Challenger, MT575EY

Discover all variants of transmission available for this tractor model.

Transmission variants 1

TransmissionAutoPower VI
TypeSix-speed power shift
Gears24 forward and reverse

Transmission variants 2

TransmissionTechStar
TypeContinuously-variable transmission (CVT)
GearsInfinite forward and reverse
24-speed six-speed power shift
Continuously-variable transmission (CVT)

Mechanical Specs of Challenger, MT575EY

This section summarizes all mechanical information such as the brake system and other specifications.

Four-wheel drive
Cab standard with air-conditioning. Auto-Guide 3000
Hydraulic wet disc brakes
Power steering
Differential lockElectro-hydraulic front and rear

Power Information of Challenger, MT575EY

Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.

Rear PTOIndependent
540/540E/1000/1000E *With CVT transmission.
Rear PTO Type540/540E/1000
540E/1000E/1000 OptOptional

Hydraulics Specifications of Challenger, MT575E

Hydraulic system type, pressure, pump flow and valves.

39 gpm*Optional with AutoPower VI [147.6 lpm]
TypeClosed-center load sensing
SCV flow26.4 gpm [99.9 lpm]
Valves4
Capacity26.4 gal [99.9 L]
50 gpm*Optional with CVT [189.2 lpm]
Total flow29 gpm [109.8 lpm]
Pressure2900 psi [200.0 bar]

Three-Point Hitch of Challenger, MT575E

Hitch category and rear/front lift capacity.

Rear TypeIII/IIIN
Front lift (at ends)7954 lbs [3607 kg]
Front HitchIIIN OptOptional
Rear lift (at ends)13500 lbs [6123 kg]
16700 lbs*Lift capacity with CVT transmission. [7575 kg]

Electrical System of Challenger, MT575E

Battery voltage, charging system and ground.

GroundNegative
Charging systemAlternator
Battery volts12

Frequently asked questions

How much horsepower does the Challenger MT575E have?

The Challenger MT575E delivers 200 HP.

What years was the Challenger MT575E produced?

The Challenger MT575E was produced in 2015-2020.

What engine does the Challenger MT575E have?

The Challenger MT575E is powered by a Turbocharged intercooled diesel, 6-cylinder engine.

What transmission does the Challenger MT575E use?

The Challenger MT575E uses a AutoPower VI transmission.

Is the Challenger MT575E 4WD?

The Challenger MT575E is available in 4WD.

Compare the Challenger MT575E with another model