Challenger MT595B tractor

Challenger MT595B

Power

215 hp

Production

2010-2012

Engine

Wastegate turbocharged and air-to-air intercooled diesel, 6-cylinder

Transmission

Techstar CVT

Weight

16400 lbs [7439 kg]

Drive

4WD

From the same series:

MT585B

Introduction

Production Information of Challenger, MT595B

The production information of the tractor (MT595B) includes details about its manufacturing.

Row-Crop tractor
ManufacturerChallenger (a part of AGCO)

Dimension and Tires Information of Challenger, MT595B

This section sums up the dimension and tires information of the tractor.

Rear axle88 inch length [2235 mm]
Wheelbase118 inches [299 cm]
Shipping weight16400 lbs [7439 kg]
Height (cab)121.9 inches [309 cm]
Length199.5 inches [506 cm]
Rear axle120 inch length [3048 mm]
Clearance (drawbar)16 inches [40 cm]
Width118.1 inches (min) [299 cm]
Rear tread60 to 120 inches [152 to 304 cm (long bar)]
Rear tread60 to 88 inches [152 to 223 cm]

No data available

Engine Specifications of Challenger, MT595B

Get the specifications for the engine and if different options are available.

AGCO SISU Power 74CTA
Liquid-cooled inline
Wastegate turbocharged and air-to-air intercooled diesel
6-cylinder
StarterElectric
Displacement449.4 ci [7.4 L]
Power (gross)215 hp [160.3 kW]
Bore/Stroke4.252x5.276 inches [108 x 134 mm]
Coolant capacity35.9 qts [34.0 L]
Starter volts12
Fuel systemElectronic common rail
Maximum Power240 hp [179.0 kW]
EmissionsTier III

Transmission Information of Challenger, MT595BY

Discover all variants of transmission available for this tractor model.

Transmission variants 1

TransmissionTechstar CVT
Oil capacity55 qts [52.1 L]
TypeContinuously variable transmission
GearsInfinite forward and reverse

Mechanical Specs of Challenger, MT595BY

This section summarizes all mechanical information such as the brake system and other specifications.

Four-wheel drive
Cab standard with air-conditioning.
Hydraulic wet disc brakes
SteeringHydrostatic power

Power Information of Challenger, MT595BY

Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.

Rear PTOIndependent
Front PTO Type1000 (1.375)
Front PTOOptional
ClutchElectro-hydraulic
Rear PTO Type540/540E/1000 (1.375)

Hydraulics Specifications of Challenger, MT595B

Hydraulic system type, pressure, pump flow and valves.

TypeClosed center pressure flow compensated
Total flow29 gpm [109.8 lpm]
Valves3 or 4
Capacity26.4 gal [99.9 L]
39 gpm (optional) [147.6 lpm]
Pressure2900 psi [200.0 bar]

Three-Point Hitch of Challenger, MT595B

Hitch category and rear/front lift capacity.

Rear TypeIII
Front lift8800 lbs [3991 kg]
Front HitchOptional
ControlLower link draft sensing
Rear lift (at 24"/610mm)16140 lbs [7321 kg]

Electrical System of Challenger, MT595B

Battery voltage, charging system and ground.

GroundNegative
Battery CCA600 (each)
Batteries2
Charging systemAlternator
Battery volts12
Charging amps175

Frequently asked questions

How much horsepower does the Challenger MT595B have?

The Challenger MT595B delivers 215 HP.

What years was the Challenger MT595B produced?

The Challenger MT595B was produced in 2010-2012.

What engine does the Challenger MT595B have?

The Challenger MT595B is powered by a Wastegate turbocharged and air-to-air intercooled diesel, 6-cylinder engine.

What transmission does the Challenger MT595B use?

The Challenger MT595B uses a Techstar CVT transmission.

How much does the Challenger MT595B weigh?

The Challenger MT595B weighs 16400 lbs [7439 kg].

Is the Challenger MT595B 4WD?

The Challenger MT595B is available in 4WD.

Compare the Challenger MT595B with another model