Challenger MT635B
Power
215 hp
Production
2005-2008
Engine
Turbocharged diesel, 6-cylinder 24-valve
Transmission
TechStar
Drive
4WD
From the same series:
Introduction
Production Information of Challenger, MT635B
The production information of the tractor (MT635B) includes details about its manufacturing.
| Row-Crop tractor |
| Built in Beauvais, France |
| Manufacturer | Challenger (a part of AGCO) |
|---|
Dimension and Tires Information of Challenger, MT635B
This section sums up the dimension and tires information of the tractor.
| Rear tread | 60 to 88 inches [152 to 223 cm] |
|---|---|
| Wheelbase | 121.1 inches [307 cm] |
| Ground clearance | 22.4 inches [56 cm] |
| Height (cab) | 123.6 inches [313 cm] |
| Length | 206 inches [523 cm] |
| Bar rear axle | 4.33 by 118 inches [109 by 2997 mm] |
| Width | 118 inches [299 cm] |
| Ag front | 380/85R34 |
|---|---|
| Ag rear | 480/80R46 |
Engine Specifications of Challenger, MT635B
Get the specifications for the engine and if different options are available.
| Sisu 74ETA |
| Liquid-cooled vertical inline |
| 6-cylinder 24-valve |
| Turbocharged diesel |
| Air cleaner | Dual paper elements |
|---|---|
| Rated RPM | 2200 |
| Displacement | 449 ci [7.4 L] |
| Bore/Stroke | 4.251x5.278 inches [108 x 134 mm] |
| Power | 215 hp [160.3 kW] |
| Compression | 17.5:1 |
| Pre-heating | 1000W coolant heater OptOptional |
| Coolant capacity | 35.6 qts [33.7 L] |
| Oil capacity | 20 qts [18.9 L] |
| Starter volts | 12 |
Transmission Information of Challenger, MT635BY
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Transmission | TechStar |
|---|---|
| Oil capacity | 70.8 qts [67.0 L] |
| Type | Continuously variable transmission (CVT) |
| Gears | Infinite forward and reverse (2-range) |
Mechanical Specs of Challenger, MT635BY
This section summarizes all mechanical information such as the brake system and other specifications.
| Cab standard with heat and A/C. Optional pneumatic cab suspension and automatic climate control. |
| Four-wheel drive |
| Hydraulic wet disc brakes |
| Power steering |
| Final drives | Inboard planetary |
|---|---|
| Trailer brakes | Hydraulic OptOptional |
| Differential lock | Electrohydraulic front and rear |
Power Information of Challenger, MT635BY
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Engine RPM | 540@2037 |
|---|---|
| Rear PTO | Independent |
| 1000 (1.375) | |
| 540/540E OptOptional | |
| Clutch | Electro-hydraulic wet disc |
| 540E@ 1598 | |
| 1000 (1.75) | |
| Rear PTO Type | 540 (1.375) |
| 1000@2031 |
Hydraulics Specifications of Challenger, MT635B
Hydraulic system type, pressure, pump flow and valves.
| Type | Pressure flow compensated (PFC) |
|---|---|
| Total flow | 39 gpm [147.6 lpm] |
| Valves | 4 to 6 |
| Capacity | 26.4 gal [99.9 L] |
| Pressure | 2900 psi [200.0 bar] |
Three-Point Hitch of Challenger, MT635B
Hitch category and rear/front lift capacity.
| Rear Type | III |
|---|---|
| 12,100 lbsOptOptional [5488 kg] | |
| Front lift | 7,700 lbs [3492 kg] |
| Rear lift (at 24"/610mm) | 15,600 lbs [7076 kg] |
| Front Hitch | II OptOptional |
Electrical System of Challenger, MT635B
Battery voltage, charging system and ground.
| Ground | Negative |
|---|---|
| Battery CCA | 775 |
| Batteries | 2 |
| Charging system | Alternator |
| Battery volts | 12 |
| Charging amps | 150 |
Frequently asked questions
How much horsepower does the Challenger MT635B have?
The Challenger MT635B delivers 215 HP.
What years was the Challenger MT635B produced?
The Challenger MT635B was produced in 2005-2008.
What engine does the Challenger MT635B have?
The Challenger MT635B is powered by a Turbocharged diesel, 6-cylinder 24-valve engine.
What transmission does the Challenger MT635B use?
The Challenger MT635B uses a TechStar transmission.
Is the Challenger MT635B 4WD?
The Challenger MT635B is available in 4WD.