Ford 276
Power
116 hp
Production
1988-1990
Engine
Turbocharged diesel, 4-cylinder
Transmission
Hydrostatic
Drive
4WD
Introduction
Production Information of Ford, 276
The production information of the tractor (276) includes details about its manufacturing.
| Built in Winnipeg, Manitoba, Canada |
| Distributor | Ford |
|---|---|
| Manufacturer | Versatile |
Dimension and Tires Information of Ford, 276
This section sums up the dimension and tires information of the tractor.
| Ground clearance | 24 inches [60 cm] |
|---|
No data available
Engine Specifications of Ford, 276
Get the specifications for the engine and if different options are available.
| Ford |
| Liquid-cooled |
| Turbocharged diesel |
| 4-cylinder |
| Starter | Electric |
|---|---|
| Displacement | 268 ci [4.4 L] |
| Pre-heating | Ether injection |
| Bore/Stroke | 4.40x4.40 inches [112 x 112 mm] |
| Coolant capacity | 23.25 qts [22.0 L] |
| Starter volts | 12 |
| Rated RPM | 2500 |
| Block heater | |
| Power | 116 hp [86.5 kW] |
Transmission Information of Ford, 276Y
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Type | Hydrostatic |
|---|---|
| Gears | Infinite forward and reverse (3-range) |
| Oil capacity | 34 qts [32.2 L] |
Mechanical Specs of Ford, 276Y
This section summarizes all mechanical information such as the brake system and other specifications.
| Cab standard. |
| Articulated power steering |
| Hydraulic disc brakes |
| Drive | 4x4 4WD |
|---|
Power Information of Ford, 276Y
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| 1000@2500 | |
| Rear PTO | Independent |
| 1000 (1.375) | |
| Front PTO Type | 540 (1.375) |
| Clutch | Wet disc |
| Engine RPM | 540@2500 |
| Rear PTO Type | 540/1000 (1.375) |
Hydraulics Specifications of Ford, 276
Hydraulic system type, pressure, pump flow and valves.
| Steering press. | 2300 psi [158.6 bar] |
|---|---|
| Type | Closed center load sensing |
| Pump flow | 27 gpm [102.2 lpm] |
| Front valves | 2 OptOptional |
| Pressure | 2800 psi [193.1 bar] |
| Steering flow | 5 gpm [18.9 lpm] |
| Valves | 3 |
Three-Point Hitch of Ford, 276
Hitch category and rear/front lift capacity.
| Front lift (at 24"/610mm) | 2000 lbs [907 kg] |
|---|---|
| Rear Type | II/I |
| Front Hitch | II/I |
| Rear lift (at 24"/610mm) | 4400 lbs [1995 kg] |
| Control | Position control |
| Front lift (at ends) | 3266 lbs [1481 kg] |
| Rear lift (at ends) | 7000 lbs [3175 kg] |
Electrical System of Ford, 276
Battery voltage, charging system and ground.
| Ground | Negative |
|---|---|
| Battery volts | 12 |
| Charging system | Alternator |
| Battery CCA | 850 |
Frequently asked questions
How much horsepower does the Ford 276 have?
The Ford 276 delivers 116 HP.
What years was the Ford 276 produced?
The Ford 276 was produced in 1988-1990.
What engine does the Ford 276 have?
The Ford 276 is powered by a Turbocharged diesel, 4-cylinder engine.
What transmission does the Ford 276 use?
The Ford 276 uses a Hydrostatic transmission.
Is the Ford 276 4WD?
The Ford 276 is available in 4WD.