Ford 8100
Power
115 hp
Production
1978-1981
Engine
Diesel, 6-cylinder
Transmission
Dual Power
Weight
9078 lbs [4117 kg]
Drive
2WD/4WD
Introduction
Production Information of Ford, 8100
The production information of the tractor (8100) includes details about its manufacturing.
| The Ford 8100 was assembled for Ford by County to provide a 100 horsepower tractor using existing components. |
| Built in Fleet, England |
| Row-Crop tractor |
| Distributor | Ford |
|---|---|
| Manufacturer | County |
Dimension and Tires Information of Ford, 8100
This section sums up the dimension and tires information of the tractor.
| Rear tread | 60 to 80 inches [152 to 203 cm] |
|---|---|
| Wheelbase | 102.5 inches [260 cm] |
| Height (exhaust) | 119 inches [302 cm] |
| Height (cab) | 115 inches [292 cm] |
| Length | 165 inches [419 cm] |
| Clearance (rear axle) | 29.5 inches [74 cm] |
| Weight | 9078 lbs [4117 kg] |
| Width | 78.5 inches [199 cm] |
| Front tread | 56 to 80 inches [142 to 203 cm] |
| Clearance (drawbar) | 22 inches [55 cm] |
| Clearance (front axle) | 22 inches [55 cm] |
| Ag front | 11.00-16 |
|---|---|
| Ag rear | 14-38 |
Engine Specifications of Ford, 8100
Get the specifications for the engine and if different options are available.
| Ford 2714E |
| Liquid-cooled |
| The 105 horsepower 2714E engine was used on the Ford 8100 in France and Switzerland as opposed to the 2415E used in other markets. |
| Diesel |
| 6-cylinder |
| Starter type | Electric |
|---|---|
| Firing order | 1-5-3-6-2-4 |
| Power | 115 hp [85.8 kW] |
| Oil capacity | 14.4 qts [13.6 L] |
| Air cleaner | Dry |
| Compression | 16:11 |
| Fuel system | Direct injection |
| Bore/Stroke | 4.22x4.52 inches [107 x 115 mm] |
| Displacement | 380 ci [6.2 L] |
| Torque RPM | 1600 |
| Torque | 307 lb-ft [416.3 Nm] |
| Rated RPM | 2100 |
Transmission Information of Ford, 8100Y
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Transmission | Dual Power |
|---|---|
| Clutch | 305mm dry disc |
| Type | Two-speed power shift |
| Gears | 16 forward and 4 reverse |
Mechanical Specs of Ford, 8100Y
This section summarizes all mechanical information such as the brake system and other specifications.
| Two- or four-wheel drive |
| Mechanical wet disc brakes |
| Power steering |
| Cab standard with heater. |
| Final drives | Planetary |
|---|---|
| Differential lock | Mechanical rear |
Power Information of Ford, 8100Y
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Independent |
|---|---|
| 1000@2060 | |
| Rear PTO Type | 540/1000 (1.375) |
| Engine RPM | 540@1900 |
Hydraulics Specifications of Ford, 8100
Hydraulic system type, pressure, pump flow and valves.
| Type | Open center |
|---|---|
| Pressure | 2500 psi [172.4 bar] |
| Pump flow | 10.4 gpm [39.4 lpm] |
Three-Point Hitch of Ford, 8100
Hitch category and rear/front lift capacity.
| Rear Type | II |
|---|---|
| Control | Position and draft control |
| Rear lift | 6380 lbs [2893 kg] |
Electrical System of Ford, 8100
Battery voltage, charging system and ground.
| Charging system | Alternator |
|---|---|
| Battery AH | 128 |
| Charging amps | 46 |
| Battery volts | 12 |
Frequently asked questions
How much horsepower does the Ford 8100 have?
The Ford 8100 delivers 115 HP.
What years was the Ford 8100 produced?
The Ford 8100 was produced in 1978-1981.
What engine does the Ford 8100 have?
The Ford 8100 is powered by a Diesel, 6-cylinder engine.
What transmission does the Ford 8100 use?
The Ford 8100 uses a Dual Power transmission.
How much does the Ford 8100 weigh?
The Ford 8100 weighs 9078 lbs [4117 kg].
Is the Ford 8100 4WD?
The Ford 8100 is available in 2WD/4WD.