Ford 8530
Power
116 hp[P] hp
Production
1990-1993
Engine
6-cylinder
Transmission
Dual Power - constant mesh
Drive
2WD/4WD
From the same series:
Introduction
Ford 8530: Technical Reference
The Ford 8530 is a row-crop tractor produced in Antwerp, Belgium, between 1990 and 1993. Positioned as a versatile workhorse for mid-to-large scale operations, it features a 116 horsepower output and was designed for demanding field tasks during the early 1990s.
Engine and Performance
The tractor is powered by a 6-cylinder, liquid-cooled engine with a displacement of 401 cubic inches (6.6 liters). It operates at a rated speed of 2300 RPM. The engine configuration uses a firing order of 1-5-3-6-2-4, with a compression ratio of 16.3:1. Maintenance requirements include specific valve clearances, set at 0.356 mm for intake and 0.432 mm for exhaust when cold.
Transmission and Drivetrain
Two transmission options were available: a standard 8-speed constant mesh transmission and a 16-speed Dual Power version. The Dual Power system incorporates a 'Powerdrive' low range, allowing for on-the-go shifting between modes via a foot switch, indicated by a rabbit or turtle icon on the dashboard. The machine was available in both two-wheel and four-wheel drive configurations.
Hydraulics and Hitch
The hydraulic system utilizes an open-center gear pump, with an optional dual pump setup increasing flow from 20.9 gpm (79.1 lpm) to 29.6 gpm (112.0 lpm). It operates at a system pressure of 2500 psi. The rear hitch is a Category II type, featuring both position and draft control for precise implement management. The independent rear PTO offers dual speeds of 540 and 1000 RPM.
Dimensions and Operator Environment
The tractor features a 105-inch (266 cm) wheelbase and a total length of 172 inches (436 cm). It is equipped with power steering and power disc brakes as standard. An optional cab was offered, which included heating and air conditioning to facilitate operator comfort during extended work periods.
Conclusion
The Ford 8530 represents a robust, mechanical-focused tractor suitable for various row-crop agricultural operations. Its combination of multiple transmission choices, flexible hydraulic capacity, and available climate-controlled cab makes it a reliable asset for operators requiring consistent performance in field conditions.
Production Information of Ford, 8530
- Original price was $46,000 in 1993
- Row-Crop tractor
- Built in Antwerp, Belgium
| Manufacturer | Ford |
|---|
Dimension and Tires Information of Ford, 8530
| Wheelbase | 105 inches [266 cm] |
|---|---|
| Ground clearance | 16.4 inches [41 cm] |
| Length | 172 inches [436 cm] |
| Width | 82 inches [208 cm] |
| Ag front | 11.00-16 (2WD) |
|---|---|
| Ag front(optional) | 14.9/13-28 (4WD) |
| Ag rear | 18.4/15-38 |
Engine Specifications of Ford, 8530
- Liquid-cooled
- 6-cylinder
| Displacement | 401 ci [6.6 L] |
|---|---|
| Oil capacity | 19.6 qts [18.5 L] |
| Rated RPM | 2300 |
| Bore/Stroke | 4.40x4.40 inches [112 x 112 mm] |
| Exhaust valve clearance | 0.017-0.019 inches (cold) [0.432 mm] |
| Intake valve clearance | 0.014-0.016 inches (cold) [0.356 mm] |
| Coolant capacity | 21.2 qts [20.1 L] |
| Firing order | 1-5-3-6-2-4 |
| Compression | 16.3:1 |
Transmission Information of Ford, 8530
Transmission variants 1
- The Dual Power transmission provides a 'Powerdrive' low range to the basic constant mesh transmission. A foot switch next to the clutch is used to engage and disengage the mode, and may be switched while the tractor is in motion. A "rabbit" or "turtle" display light on the instrument panel indicates which mode the transmission is selected.
| Transmission | Dual Power - constant mesh |
|---|---|
| Transmission(optional) | 85.5 qts (4WD) [80.9 L] |
| Gears | 16 forward and 4 reverse |
| Oil capacity | 80 qts (2WD) [75.7 L] |
Transmission variants 2
- Tranmission is operated with two levers and the clutch pedal. Left lever selects high, low, or the optional creeper range. Right lever selects one of four forward gears, or reverse. Tractor must be stopped to make gear or range changes.
| Transmission | Constant mesh |
|---|---|
| Transmission(optional) | 87.3 qts (4WD) [82.6 L] |
| Gears | 8 forward and 2 reverse |
| Oil capacity | 72.8 qts (2WD) [68.9 L] |
- 16-speed
- 8-speed
Mechanical Specs of Ford, 8530
- Two- or four-wheel drive
- Optional cab with heat and A/C
- Power steering
- Power disc brakes
Power Information of Ford, 8530
| Rear PTO | Independent |
|---|---|
| Rear PTO Type | 540/1000 |
Hydraulics Specifications of Ford, 8530
| Steering cap. | 2 qts [1.9 L] |
|---|---|
| Type | Open center gear pump, dual pumps optional |
| SCV flow | 17.6 gpm [66.6 lpm] |
| SCV flow(optional) | 29.6 gpm (dual pumps) [112.0 lpm] |
| Pressure | 2500 psi [172.4 bar] |
| Steering press. | 2025 psi [139.6 bar] |
| Steering press.(optional) | 19.0 gpm (dual pumps) [71.9 lpm] |
| Pump flow | 20.9 gpm [79.1 lpm] |
Three-Point Hitch of Ford, 8530
| Rear Type | II |
|---|---|
| Control | Position and draft control |
Electrical System of Ford, 8530
| Charging system | Alternator |
|---|---|
| Charging amps | 90 |
| Battery volts | 12 |
Where it sits
With 116 hp[P] HP, the Ford 8530 sits just below TW-5 (122 HP) in Ford's range. Its power puts it in the 76th percentile of 1990s models in our database (2097 machines).
Frequently asked questions
How much horsepower does the Ford 8530 have?
The Ford 8530 delivers 116 hp[P] HP.
What years was the Ford 8530 produced?
The Ford 8530 was produced in 1990-1993.
What engine does the Ford 8530 have?
The Ford 8530 is powered by a 6-cylinder engine.
What transmission does the Ford 8530 use?
The Ford 8530 uses a Dual Power - constant mesh transmission.
Is the Ford 8530 4WD?
The Ford 8530 is available in 2WD/4WD.