Ford 9030 tractor

Ford 9030

Power

116 hp

Production

1990-1997

Engine

Turbocharged diesel, 4-cylinder

Transmission

Hydrostatic

Weight

10150 lbs [4604 kg]

Drive

4WD

From the same series:

Introduction

Production Information of Ford, 9030

The production information of the tractor (9030) includes details about its manufacturing.

Built in Winnipeg, Manitoba, Canada
DistributorFord
ManufacturerVersatile

Dimension and Tires Information of Ford, 9030

This section sums up the dimension and tires information of the tractor.

Ground clearance16.3 inches [41 cm]
Wheelbase80 inches [203 cm]
Shipping weight10150 lbs [4604 kg]
Width81.3 inches [206 cm]
Length180 inches (rear 3-point) [457 cm]
Max weight16000 lbs [7257 kg]
194 inches (front and rear 3-point) [492 cm]
Ag front16.9x28
Ag rear14.9x28
Ag rear16.9x28
Ag front14.9x28

Engine Specifications of Ford, 9030

Get the specifications for the engine and if different options are available.

Ford BSD444T
Liquid-cooled
Turbocharged diesel
4-cylinder
Intake valve clearance0.015 inches (cold) [0.381 mm]
Coolant capacity25.6 qts [24.2 L]
Air cleanerDry
Exhaust valve clearance0.018 inches (cold) [0.457 mm]
Rated RPM2500
Idle RPM1000-2725
Compression17.1:1
Displacement268 ci [4.4 L]
Power116 hp [86.5 kW]
Bore/Stroke4.40x4.40 inches [112 x 112 mm]
Oil capacity15 qts [14.2 L]
Starter volts12
Firing order1-3-4-2

Transmission Information of Ford, 9030Y

Discover all variants of transmission available for this tractor model.

Transmission variants 1

TypeHydrostatic
GearsInfnite forward and reverse (3-range)

Mechanical Specs of Ford, 9030Y

This section summarizes all mechanical information such as the brake system and other specifications.

Four-wheel drive
Cab with air-conditioning. Console rotates 180-degrees.
Disc brakes
Articulated power steering
Final drivesSpur gear

Power Information of Ford, 9030Y

Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.

Rear PTOIndependent
Rear PTO Type540/1000

Hydraulics Specifications of Ford, 9030

Hydraulic system type, pressure, pump flow and valves.

TypeClosed-center load-sensing
Steering press.2500 psi [172.4 bar]
Steering flow6 gpm [22.7 lpm]
Capacity10.5 gal [39.7 L]
Pump flow24 gpm [90.8 lpm]

Three-Point Hitch of Ford, 9030

Hitch category and rear/front lift capacity.

Rear TypeII/I
Front lift3000 lbs [1360 kg]
Front HitchII/I OptOptional
ControlPosition control
Rear lift (at 24"/610mm)6500 lbs [2948 kg]

Electrical System of Ford, 9030

Battery voltage, charging system and ground.

Battery Group31
GroundNegative
Battery CCA625
Batteries2
Charging systemAlternator
Battery volts12
Charging amps85

Frequently asked questions

How much horsepower does the Ford 9030 have?

The Ford 9030 delivers 116 HP.

What years was the Ford 9030 produced?

The Ford 9030 was produced in 1990-1997.

What engine does the Ford 9030 have?

The Ford 9030 is powered by a Turbocharged diesel, 4-cylinder engine.

What transmission does the Ford 9030 use?

The Ford 9030 uses a Hydrostatic transmission.

How much does the Ford 9030 weigh?

The Ford 9030 weighs 10150 lbs [4604 kg].

Is the Ford 9030 4WD?

The Ford 9030 is available in 4WD.

Compare the Ford 9030 with another model